ENGLISH
31
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Display Settings
[COLOR]
(for KD-T92MBS)
[PRESET]
Selects illumination colors for the buttons on different zones separately.
1
Select a zone (
[ZONE 1]
,
[ZONE 2]
,
[ALL ZONE]
). (See the illustration on
page 30.)
2
Select a color for the selected zone.
•
[COLOR 01]
to
[COLOR 49]
•
[USER]
: The color you have created for
[DAY COLOR]
or
[NIGHT COLOR]
is shown.
•
[COLOR FLOW01]
to
[COLOR FLOW03]
: Color changes at different
speeds.
•
[CRYSTAL]
/
[FLOWER]
/
[FOREST]
/
[GRADATION]
/
[OCEAN]
/
[RELAX]
/
[SUNSET]
: The selected color pattern is shown.* (Selectable only when
[ALL ZONE]
is selected in step 1.)
[DAY COLOR]
Stores your own day and night illumination colors for different zones.
1
Select a zone (
[ZONE 1]
,
[ZONE 2]
). (See the illustration on page 30.)
2
[RED]
/
[GREEN]
/
[BLUE]
: Select a primary color.
3
[00]
to
[31]
: Select the level.
Repeat step 2 and step 3 for all the primary colors.
• Your setting is stored to
[USER]
in
[PRESET]
.
•
[NIGHT COLOR]
or
[DAY COLOR]
is changed by turning on or off your
car’s headlights.
[NIGHT COLOR]
[COLOR GUIDE]
[ON]
: The illumination color of
[ZONE 1]
and
[ZONE 2]
change to white
color when settings are performed on menu and list search, except in color
setting mode. ;
[OFF]
: Cancels.
* If one of these color patterns is selected, the
[ZONE 1]
and
[ZONE 2]
illumination colors will
change to the default colors.
Learning Steering Remote Control
(for KD-T721BT)
You can control the unit with the steering remote control keys on your
vehicle. After connection, you can configure the control keys according to
your preference.
• You can only make this configuration if your vehicle is equipped with the
electrical steering remote control.
• If the steering remote control in your car is not compatible, configuration
may not be completed and an error message may appear. (Page 36)
Make the connection
Configure the control keys
1
Press and hold
.
2
Turn the volume knob to select
[SYSTEM]
, then press the knob.
3
Turn the volume knob to select
[USER S.REMO]
, then press the knob.
4
Turn the volume knob to select
[SET KEY]
, then press the knob.
A key list of 16 assignable keys appears.
•
K## NONE
: No function has been assigned.
5
Turn the volume knob to select any key from the key list to assign the
function, then press the knob.
“PRESS KEY TO ASSIGN K##” appears.
Rear panel
Learning steering remote
input terminal
Gray/red
Bright green/red
Purple/red
Steering remote cable
(supplied)
Connect to your vehicle’s steering remote
harness. Contact your JVC dealer for details.
JS_JVC_KD_T92MBS_K_EN_1.indd 31
JS_JVC_KD_T92MBS_K_EN_1.indd 31
16/2/2021 10:46:35 AM
16/2/2021 10:46:35 AM
