26
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
DISPLAY SETTINGS
Zone identification for brightness settings
Zone identification for color settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[DISPLAY]
[DIMMER]
Dims the illumination.
[OFF]
: Dimmer is turned off. Brightness changes to
[DAY]
setting.
[ON]
: Dimmer is turned on. Brightness changes to
[NIGHT]
setting.
(See “
[BRIGHTNESS]
” below.)
[DIMMER TIME]
: Set the dimmer on and off time.
1
Turn the volume knob to adjust the
[ON]
time, then press the knob.
2
Turn the volume knob to adjust the
[OFF]
time, then press the knob.
(Default:
[ON]
:
[18:00]
;
[OFF]
:
[6:00]
)
[DIMMER AUTO]
: Dimmer turns on and off automatically when you turn off
or on the car headlights.*1
[BRIGHTNESS]
Sets the brightness for day and night separately.
1
[DAY]
/
[NIGHT]
: Select day or night.
2
Select a zone. (See the illustration on the left column.)
3
[LEVEL 00]
to
[LEVEL 31]
: Set the brightness level.
[TEXT SCROLL]
*2
[SCROLL ONCE]
: Scrolls the display information once. ;
[SCROLL AUTO]
: Repeats scrolling at 5-second intervals. ;
[SCROLL OFF]
: Cancels.
• Not applicable to Dynamic Label display information (page 29) while in
DAB source.
[FORMAT]
*3
Below information is shown on the supplementary display when Bluetooth
device is connected. (Page 29)
[BATT/SIGNAL]
: Shows the strength of the battery and signal. ;
[DATE]
: Shows the date.
*1 The illumination control wire connection is required. (Page 34)
*2 Some characters or symbols will not be shown correctly (or will be blank).
*3 Functionality depends on the type of phone used.
JS_JVC_KD_DB902BT_E_EN_4.indd 26
JS_JVC_KD_DB902BT_E_EN_4.indd 26
7/25/2018 12:29:29 PM
7/25/2018 12:29:29 PM
