ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
Make a call from memory
1
Press
to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
“NO PRESET” appears if there is no contact stored.
Bluetooth mode settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[BT MODE]
[PHONE SELECT]
*
Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
[AUDIO SELECT]
*
[DEVICE DELETE]
1
Turn the volume knob to select a device to delete, then press the knob.
2
Turn the volume knob to select
[YES]
or
[NO]
, then press the knob.
[PIN CODE EDIT]
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
S
/
T
to move the entry position.
Repeat steps 1 and 2 until you finish entering the PIN code.
3
Press the volume knob to confirm.
* You can connect a maximum of two Bluetooth phones and one Bluetooth audio device at a time.
[RECONNECT]
[ON]
: The unit is automatically reconnect when the last connected
Bluetooth device is within the connectable range. ;
[OFF]
: Cancels.
[AUTO PAIRING]
[ON]
: The unit is automatically paired with the supported Bluetooth
device (iPhone/iPod touch) when it is connected through USB input
terminal. Depending on the operating system of the connected device, this
function may not work. ;
[OFF]
: Cancels.
[INITIALIZE]
[YES]
: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ;
[NO]
: Cancels.
[INFORMATION]
[MY BT NAME]
: Displays the name of your receiver (“KD-DB9
BT”). ;
[MY ADDRESS]
: Shows address of this unit.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
.
“BLUETOOTH”
“CHECK MODE” appears. “SEARCH NOW USING
PHONE” “PIN IS 0000” scrolls on the display.
2
Search and select the name of your receiver (“KD-DB9
BT”) on the
Bluetooth device within 3 minutes.
3
Perform (A), (B) or (C) depending on what appears on the display.
(A) “PAIRING” “XXXXXX” (6-digit passkey)
: Ensure that the same
passkey appears on the unit and Bluetooth device, then operate the
Bluetooth device to confirm the passkey.
(B) “PAIRING” “PIN IS 0000”
: Enter “0000” on the Bluetooth device.
(C) “PAIRING”
: Operate the Bluetooth device to confirm pairing.
JS_JVC_KD_DB902BT_E_EN_3.indd 17
JS_JVC_KD_DB902BT_E_EN_3.indd 17
7/11/2018 4:43:28 PM
7/11/2018 4:43:28 PM
