20
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Symptom
Remedy
“NOT SUPPORT” appears and
track skips.
Check whether the track is a playable format.
( 18)
“CANNOT PLAY” flashes and/
or connected device cannot be
detected.
• Check whether the connected device is compatible
with this unit and ensure the files are in supported
formats.
( 18)
• Reattach the device.
“READING” keeps flashing.
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
The iPod/iPhone does not turn on
or does not work.
• Check the connection between this unit and iPod/
iPhone.
• Detach and reset the iPod/iPhone using hard reset.
Bluetooth®
No Bluetooth device is
detected.
• Search from the Bluetooth device again.
• Reset the unit.
( 3)
Pairing cannot be made.
• Make sure you have entered the same PIN code to
both the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again.
( 12)
“PAIRING FULL” appears.
The number of registered devices has reached its limit.
Retry after deleting an unnecessary device.
( 15, DELETE PAIR)
“PLEASE WAIT” appears.
The unit is preparing to use the Bluetooth function. If
the message does not disappear, turn off and turn on
the unit, then connect the device again.
“BT DEVICE NOT FOUND”
appears.
The unit failed to search for the registered Bluetooth
devices during
[AUTO CNNCT]
. Turn on Bluetooth
from your device and connect manually. (
15
)
Echo or noise occurs.
• Adjust the microphone unit’s position. (
11
)
• Check the
[ECHO CANCEL]
setting. (
13
)
Symptom
Remedy
Bluetooth®
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth device.
• Move the car to a place where you can get a better
signal reception.
“NOT SUPPORT” appears.
The connected phone does not support Voice
Recognition feature.
“ERROR” appears.
Try the operation again. If “ERROR” appears again,
check if the device supports the function you have
tried.
The unit does not respond
when you try to copy the
phonebook to the unit.
You may have tried to copy the same entries (as
stored) to the unit. Press
DISP
or
G
T/P
to exit.
Sound is being interrupted or
skipped during playback of a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Turn off, then turn on the unit and try to connect
again.
• Other Bluetooth devices might be trying to connect
to the unit.
The connected Bluetooth
audio player cannot be
controlled.
• Check whether the connected Bluetooth audio
player supports Audio/Video Remote Control Profile
(AVRCP). (Refer to the instructions of your audio
player.)
• Disconnect and connect the Bluetooth player again.
“H/W ERROR” appears.
Reset the unit and try the operation again. If “H/W
ERROR” appears again, consult your nearest service
center.
“BT ERROR PLS UPDATE”
appears.
Update the Bluetooth firmware. (
4
)
If you still have troubles, reset the unit. ( 3)
TROUBLESHOOTING
JS_JVC_KD-DB95BT_E_f_EN.indd 20
JS_JVC_KD-DB95BT_E_f_EN.indd 20
12/19/2013 4:23:39 PM
12/19/2013 4:23:39 PM