14
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
DIAL NUMBER
1
Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2
Press
S
/
T
to move the entry position.
Repeat
steps
1
and
2
until you finish entering the phone number.
3
Press the volume knob to call.
VOICE
Speak the name of the contact you want to call or the voice command to
control the phone functions.
( Use Voice Recognition)
SETTINGS
Default:
XX
AUTO ANSWER
01 SEC
—
30 SEC
: The unit answer incoming call automatically in the
selected time (seconds). ;
OFF
: Cancels.
RING TONE
IN UNIT:
The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
•
CALL:
Selects your preferred ring tone (
TONE 1 — 5
) for incoming
calls.
•
MESSAGE:
Selects your preferred ring tone (
TONE 1 — 5
) for
incoming text messages.
IN PHONE:
The unit uses the connected phones’ ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
RING COLOR
COLOR
01
—
COLOR
29
(
COLOR 06
): Display zone will change to
the selected color during a call or when a text message comes in. ;
OFF
: Cancels.
MSG NOTICE
ON:
The unit rings and “RCV MESSAGE” appears to notify you of an
incoming text message. ;
OFF
: Cancels.
Text message notification
When the phone receives a text message, the unit rings and “RCV
MESSAGE” appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1
Press and hold
.
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
holding
activate the priority device.
( 15, PRIORITY)
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Select a contact by name
• You can search through the contacts quickly according to the first letter
(A to Z, 0 to 9, and OTHERS).
• “OTHERS” appears if the first character is other than A to Z, 0 to 9.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select
[PHONEBOOK]
, then press the knob.
3
Press
1
K
/
2
J
to select the desired letter.
4
Turn the volume knob to select a name, then press the knob.
5
Turn the volume knob to select a phone number, then press the
knob to call.
To return to the previous setting item or hierarchy, press
G
T/P
.
Store a contact in memory
You can store up to 5 contacts.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select
[RECENT CALL]
,
[PHONEBOOK]
, or
[DIAL NUMBER]
, then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
BLUETOOTH®
JS_JVC_KD-DB95BT_E_f_EN.indd 14
JS_JVC_KD-DB95BT_E_f_EN.indd 14
11/22/2013 11:54:30 AM
11/22/2013 11:54:30 AM
