1-10 (No.MA446<Rev.001>)
Fig.6
(5) Remove the one screw
J
attaching the Heat sink. (See
Fig.7)
(6) Remove the four screws
K
and one screw
L
attaching the
Rear bracket. (See Fig.7)
Fig.7
(7) Disconnect the connector wires from Rear bracket con-
nected to connectors
CN861
,
CN871
,
CN922
,
CN923
and
CN931
of the Main board. (See Fig.8)
Fig.8
3.1.3 Removing the DVD mechanism (See Fig.9)
(1) Remove the three screws
M
attaching the DVD mecha-
nism.
Fig.9
3.1.4 Removing the Connection board (See Fig.10)
(1) Disconnect the card wire from DVD mechanism connected
to connector
CN395
of the Connection board.
(2) Disconnect the connector wire from BT antenna connected
to connector of RF module.
(3) Remove the three screws
N
attaching the Connection
board.
Fig.10
3.1.5 Removing the Panel A control board (See Fig.11)
(1) Remove the eight screws
P
attaching the Rear cover.
Fig.11
H
J
L
K
CN931
CN861
CN923
CN871
CN922
M
M
M
N
N
RF module
CN395
Connecotr
wire
P
P
