(No.MA392<Rev.002>)1-19
3.2.7 Removing the pickup
(See Figs.10 to 12)
• Remove the top cover, base board and chassis unit.
(1) From the bottom side of the chassis unit, remove the screw
E
attaching the pu. shaft holder B and pull the pu. shaft out
of the pu. shaft holder A. (See Fig.10.)
(2) Remove the screw
F
attaching the pu. shaft holder A. (See
Fig.10.)
(3) Take out the pickup with pu. shaft holder A and feed screw
assembly from the chassis unit. (See Fig.11.)
(4) Remove the section
h
of the pu. shaft holder A in the direction
of the arrow. (See Fig.11.)
(5) Remove the feed screw assembly from the section
j
of the
pickup in the direction of the arrow. (See Fig.11.)
(6) Remove the screw
G
attaching the feed screw holder to the
pickup. (See Fig.12.)
Reference:
Remove the feed nut spring from the feed screw holder
as required. (See Fig.12.)
(7) Release the claw
k
in the direction of the arrow to remove
the feed sub holder. (See Fig.12.)
3.2.8 Reattaching the pickup
(See Figs.10 to 13)
(1) Reattach the feed sub holder to the pickup. (See Fig.12.)
(2) Reattach the feed screw holder to the pickup using the
screw
G
. (See Fig.12.)
(3) Reattach the feed screw assembly and pu. shaft holder A
to the pickup as before. (See Fig.11.)
(4) Set the section
m
of the pickup to the rail of the chassis unit
at first and attach the pickup to the chassis unit with the
screw
F
as before. (See Figs.10 and 13.)
(5) Attach the pu. shaft to the pickup as before. (See Fig.10.)
(6) Attach the pu. shaft holder B to the chassis unit with the
screw
E
as before. (See Fig.10.)
Fig.10
Fig.11
Fig.12
Fig.13
Pu. shaft holder A
Chassis unit
Pu. shaft
Pickup
Pu. shaft holder B
E
F
Pickup
Feed screw assembly
Pu. shaft holder A
h
j
k
Pickup
Feed screw holder
Feed sub holder
G
Feed screw
holder
Feed nut
spring
F
Chassis unit
Pickup
m
Rail
Содержание KD-APD89J
Страница 44: ... M E M O ...
