(No.MA392<Rev.002>)1-25
3.2.18 Removing the cam plate R
(See Fig.25)
• Remove the top cover, base board, chassis unit, clamper assembly,
top plate assembly and loading roller assembly.
From the right side of the chassis unit, remove the cam plate R
from the slots
ax
of the chassis unit.
Reference:
When a slide hook rivet assembly and a trigger rack spring have
come off from the chassis unit, attach them before attaching the
cam plate R.
3.2.19 Removing the trigger rack plate
(See Figs.25 and 26)
• Remove the top cover, base board, chassis unit, clamper assembly,
top plate assembly, loading roller assembly and cam plate R.
(1) Remove the slide hook rivet assembly and trigger rack
spring from the chassis unit. (See Fig.25.)
(2) From the bottom side of the chassis unit, pull out the loading
gear 1. (See Fig.26.)
(3) Remove the trigger control spring from the sections (
ay
,
az
). (See Fig.26.)
(4) Take out the trigger rack plate from the chassis unit. (See
Fig.26.)
Reference:
When attaching the trigger rack plate, insert the projection
a'
of the chassis unit in the slot
b'
on the bottom side of the trigger
rack plate as before. (See Fig.26.)
Fig.25
Fig.26
Chassis unit
Slide hook rivet assembly
Trigger rack spring
Cam plate R
ax
ax
b'
a'
Trigger
rack plate
az
Trigger control spring
ay
Trigger rack plate
Loading gear 1
Chassis unit
Содержание KD-APD89J
Страница 44: ... M E M O ...