(No.MA467<Rev.002>)1-9
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
SECTION 3
DISASSEMBLY
3.1
Main body (Used figure were KD-R610U)
3.1.1 Removing the Bottom chassis (See Fig.1)
(1) Remove the three screws
A
attaching the Heat sink.
(2) Remove the one screw
B
and one screw
C
attaching the
Bottom chassis.
Fig.1
3.1.2 Removing the Front chassis (See Fig.2)
(1) Disengage four hooks
a
engaged both side of the Front
chassis.
Fig.2
3.1.3 Removing the Main board (See Fig.3, 4, 5)
(1) Remove the two screws
D
and one screw
E
attaching the
Side plate. (See Fig.3)
Fig.3
(2) Remove the two screw
F
attaching the Top chassis. (See
Fig.4)
Fig.4
(3) Remove the three screws
G
attaching the Main board.
(See Fig.5)
(4) Disconnect the B-B connector connected CD mechanism
and Main board
CN501
of the Main board. (See Fig.5)
Fig.5
A
C
B
hook
a
D
E
D
F
G
G
CN501