JVC JY-HM360AG, Инструкция по эксплуатации

Страница: 80 / 136

Selecting and Performing
Operations on Multiple
Clips
0
Multiple clips can be selected during thumbnail
screen or playback screen display.
0
After selecting multiple clips, perform
appending/deleting of OK mark, deleting of clips
using the action selection screen.
0
After selecting multiple clips, the selections will
be canceled by the following operations.
0
When [Deselect All] in the action menu is
selected
0
When exiting Media mode from the thumbnail
screen
0
When removing the SD card
0
When switching the slot in use
Selecting Multiple Clips Randomly
1
Move the cursor to a clip without check
mark, and press the [OIS/2] button.
A green check mark appears on the clip.
.
1
2
Repeat Step
1
to select multiple clips.
0
Multiple clips can be selected.
0
Press the [LOLUX/3] button while the
multiple clips are selected.
0
Appends OK mark together:
[Add OK Mark]
B
[Selected Clips]
0
Deletes OK mark together:
[Delete OK Mark]
B
[Selected Clips]
0
Deletes selected clips together:
[Delete Clips]
B
[Selected Clips]
Memo :
0
Selecting clips appended with check mark and
pressing the [OIS/2] button will cancel the
selection.
0
If the operation is performed on multiple clips at
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (
R
)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.
Selecting Multiple Clips Consecutively
1 Press the [LOLUX/3] button.
2 Select “Select Range” in the action
selection screen, and press the Set button
(
R
).
.
2
3
Move the cursor to the beginning (or end)
of the range for multiple selection, and
press the Set button (
R
).
4
Move the cursor to the other end of the
range.
0 Magenta check marks appear on the clips
within the range. (Including clips that were
already selected.)
0
Gray check marks appear on selected clips
that are outside the range.
.
3
4
80
Selecting and Performing Operations on Multiple Clips
Playback