JVC JY-HM360AG, Инструкция по эксплуатации

Страница: 39 / 136

Basic Shooting
Procedures
Preparations
.
3
1
MODE
POWER
ON
OFF
4
2
4
1
Supply battery or AC adapter power to the
camera recorder.
(
A
P22 [Power Supply] )
2
Insert an SD card.
(
A
P33 [SD Card] )
3
Turn on the power of the camera recorder.
Hold down the lock button (blue) at the center of
the [POWER ON/OFF] switch to set to “ON”. The
camera recorder starts up in Camera mode and
is ready for recording.
4
Adjust the angle of the LCD monitor and
viewfinder.
(
A
P30 [Adjusting the LCD Monitor and
Viewfinder] )
Shooting
1
Configure the video and audio input
settings.
0
Set the [FULL AUTO ON/OFF] switch to “ON”
to enter Full Auto mode. This mode adjusts
the Iris, Gain, Shutter and White Balance
automatically.
0
The audio recording level is also set to Auto,
and audio from the built-in microphone is
recorded in the Full Auto mode.
0
The
a
icon appears at the lower center area
of the LCD in the Full Auto mode.
.
AE
+
6
12 :34 : 56
Jan 12, 2016
00: 00: 00.00
4030 20 10 0
P 13000K
Memo :
0
To set each individual video setting item
automatically or manually, and to carry out the
audio input settings and the audio recording
level adjustment, refer to the following.
0
[Adjusting the Brightness] (
A
P 48)
0
[Adjusting the Iris] (
A
P 48)
0
[Setting the Gain] (
A
P 49)
0
[Setting the Electronic Shutter] (
A
P 50)
0
[Adjusting the White Balance] (
A
P 51)
0
[Adjusting Audio Recording Level]
(
A
P 56)
2 Press the [REC] button to start recording to
the SD card.
This camera recorder has three [REC] buttons.
Any of the [REC] buttons can be used to start/
stop recording by default.
The tally lamp lights up in red during recording.
0
Zoom Operation
(
A
P41 [Zoom Operation] )
0
Adjusting the Focus
(
A
P43 [Focus Operation] )
Memo :
0
If both the slots are loaded with recordable cards
in the factory default, pressing the [REC] button
starts recording only to the media in the selected
slot.
When [Main Menu]
B
[System]
B
[Record Set]
B
[Slot Mode] is set to “Dual”, recording can be
performed simultaneously to the cards in both
the slots.
(
A
P66 [Dual Rec] )
0
The tally lamp can be turned off in [System]
B
[Tally Lamp].
(
A
P102 [ Tally Lamp ] )
3 Check the most recently captured images.
0
Press the [C.REVIEW/7] button on the lens to
activate the Clip Review function. The most
recently captured images are played back on
the LCD monitor and viewfinder screen.
0
After playback, the camera recorder returns
to standby mode (STBY).
(
A
P64 [Viewing Recorded Videos
Immediately (Clip Review)] )
Memo :
0
[Clip Review] is assigned to [C.REVIEW/7]
button in factory default.
0
[Clip Review] can also be assigned to other user
buttons.
(
A
P32 [Assignment of Functions to User
Buttons] )
Basic Shooting Procedures
39
Sh
ooting