EN
49
Adding a scene
1
Click the scene you want to add and
select Edit — Add — Scene.
2
Enter the In and Out points you want to
set, refering to Corrrecting program
counter data on the page to the left.
Dubbing onto one tape using two or
more tapes
1
Click the scene at which the tape is to be
changed and select Edit — Add —
Change Tape.
OR . . .
Double click the scene you want to
modify to display the Modify Edit Points
dialog box and then put a check mark
next to Change Tape.
NOTE:
No In or Out point is displayed for the scene
at which the tape is to be changed.
Note that it is also possible to clearly mark
tape change by entering a comment such as
“tape change” in the memo field.
