JVC I'Art Palette PD-42X795, Руководство по обслуживанию

Страница: 35 / 243

(No.YA100)1-35
4.7.3 VIDEO CIRCUIT [RECEIVER UNIT]
Item
Measuring
instrument
Test point Adjustment part Description
525i
A-D OFFSET Remote
control unit
Signal
generator
[1.ADJUST]
S001: PREPARE
(Adjustment setting mode change)
S008: 5i CB OF(525i cb offset)
S009: 5i CR OF(525i cr offset)
S030: R DRIVE(Red drive)
S031: G DRIVE(Green drive)
S032: B DRIVE(Blue drive)
(1) Receive a 525i component ramp pattern signal.
(2) Set "VIDEO STATUS" to STANDARD.
(3) Set "ASPECT" to FULL.
(4) Set "COLOR TEMPERATURE" to LOW.
(5) Select "1.ADJUST" from the SERVICE MODE.
(6) Set < S030 > (R DRIVE), < S031> (G DRIVE)
and < S032 > (B DRIVE) to "133".
(7) Set < S001 >(adjustment setting mode change)
to set "008" and it change to the 525i A-D offset
adjustment setting mode.
(8) Adjust < S008 > (525i Cb offset) and < S009 >
(525i Cr offset) to lose the gap (red line, green
line and blue line) which appears at both ends
of a white part at the center of the screen.
(9) Set < S001 > to set "000" and it change to the
normal mode.
(10) Press the [MUTING] key to memoirze the set
value.
1125i
BRIGHTNESS Remote
control unit
Signal
generator
[1.ADJUST]
S001: PREPARE
(Adjustment setting mode change)
S012: HD BL(1125i brightness)
S030: R DRIVE(Red drive)
S031: G DRIVE(Green drive)
S032: B DRIVE(Blue drive)
(1) Receive a 1125i gray scale pattern signal .
(2) Set "VIDEO STATUS" to STANDARD.
(3) Set "ASPECT" to FULL.
(4) Set "COLOR TEMPERATURE" to LOW.
(5) Select "1.ADJUST" from the SERVICE MODE.
(6) Set < S030 > (R DRIVE), < S031> (G DRIVE)
and < S032 > (B DRIVE) to "133".
(7) Set < S001 > (adjustment setting mode change)
to set the values "012" and it change to the
1125i brightness adjustment setting mode.
(8) Adjust < S012 > (1125i brightness) to set the
0% black part in the upper half of the screen to
be brightest.
(9) Set < S001 > to set "000" and it change to the
normal mode.
(10) Press the [MUTING] key to memoirze the set
value.
1125i
A-D OFFSET Remote
control unit
Signal
generator
[1.ADJUST]
S001: PREPARE
(Adjustment setting mode change)
S013: HD CB OF(1125i cb offset)
S014: HD CR OF(1125i cr offset)
S030: R DRIVE(Red drive)
S031: G DRIVE(Green drive)
S032: B DRIVE(Blue drive)
(1) Receive a 1125i 30% all white pattern signal.
(2) Set "VIDEO STATUS" to STANDARD.
(3) Set "ASPECT" to FULL.
(4) Set "COLOR TEMPERATURE" to LOW.
(5) Select "1.ADJUST" from the SERVICE MODE.
(6) Set < S030 > (R DRIVE), < S031> (G DRIVE)
and < S032 > (B DRIVE) to "133".
(7) Set < S001 > (adjustment setting mode change)
to set "013" and it change to the 1125i A-D
offset adjustment setting mode.
(8) Set < S013 > (1125i Cb offset) to minimize the
blue noise in the upper half of the screen.
(9) Set < S014 > (1125i Cr offset) to minimize the
red noise in the upper half of the screen.
(10) Set < S001 > to set "000" and it change to the
normal mode.
(11) Press the [MUTING] key to memoirze the set
value.
Disappears the color at both ends.
Set the 0% black part to be brightest.
Minimize the red and blue noises in
the upper half of the screen.
d u p
a t o
r