(No.YA100)1-17
3.2
DISASSEMBLY PROCEDURE [DISPLAY UNIT: PD-50X795]
NOTE:
• When exchanging parts etc. with the front side (PDP side) fancing down, place a protection sheet under the DISPALY UNIT to
prevent scratches on the front side.
• It is advisable to take notes of the connecting locations (connector numbers) of the removed connectors.
3.2.1 REMOVING THE REAR COVER (Fig.5)
(1) Remove the power cord and the system cable.
(2) Remove the 11 screws
[A]
and the 22 screws
[B]
, then
remove the REAR COVER.
3.2.2 REMOVING THE BACK COVER AND SPEAKER
HOLDER (Fig.5)
(1) Remove the 8 screws
[C]
, then remove the BACK COVER.
(2) Remove the SPEAKER HOLDER.
3.2.3 REMOVING THE TERMINAL COVER (Fig.5)
• Remove the REAR COVER.
(1) Remove the 6 screws
[D]
, then remove the CHASSIS
SHIELD BRACKET.
(2) Remove the 2 screws
[E]
and the 5 screws
[F]
, then
remove the TERMINAL COVER.
3.2.4 REMOVING THE LINE FILTER PWB (Fig.5)
• Remove the REAR COVER.
• Remove the CHASSIS SHIELD BRACKET.
• Remove the TERMINAL COVER.
(1) Remove the 2 claws
[G]
, then remove the LINE FILTER
INSULATOR.
(2) Disconnect the connector [
CN8001
] from the MAIN
POWER UNIT.
(3) Remove the 2 screws
[H]
and 2 screws
[I]
, then remove the
LINE FILTER PWB.
3.2.5 REMOVING THE AUDIO PWB (Fig.5.)
• Remove the REAR COVER.
• Remove the CHASSIS SHIELD BRACKET.
• Remove the TERMINAL COVER.
(1) Disconnect the connector [
CN60SL
] / [
CN60CB
] /
[
CN60SR
] from the AUDIO PWB .
(2) Disconnect the connector [
CN9001
] from the SUB POWER
PWB.
(3) Disconnect the connector [
CN00A
] / [
CN00C
] / [
CN00D
]
from the DISPLAY INTERFACE PWB.
(4) Remove the 4 screws
[J]
, then remove the AUDIO PWB.
3.2.6 REMOVING THE DISPLAY INTERFACE PWB (Fig.5)
• Remove the REAR COVER.
• Remove the CHASSIS SHIELD BRACKET.
• Remove the TERMINAL COVER.
(1) Disconnect the connector [
CN00A
] / [
CN00C
] / [
CN00D
] /
[
CN00E
] / [
CN00G
] / [
CN00Q
] / [
CN00T
] / [
CN00X
] /
[
CN00V
] / [
CN0FL
] / [
CN0FR
] / [
CN601
] / [
CNAH1]
from the
DISPLAY INTERFACE PWB .
(2) Remove the 3 screws
[K]
, the 2 screws
[L]
and 2 screws
[M]
, then remove the DISPLAY INTERFACE PWB.
3.2.7 REMOVING THE CHASSIS BASE (Fig.5)
• Remove the REAR COVER.
• Remove the CHASSIS SHIELD BRACKET.
• Remove the TERMINAL COVER.
• Remove the LINE FILTER PWB.
• Remove the AUDIO PWB.
• Remove the DISPLAY INTERFACE PWB.
(1) Remove the 2 screws
[N]
, then remove the CHASSIS
BASE.
d u p
a t o
r
Содержание I'Art Palette PD-42X795
Страница 129: ...88 PD 42 50X795 English 88 10 12 04 9 25 26 AM d u p a t o ...
Страница 130: ...89 PD 42 50X795 English 89 10 12 04 9 25 26 AM d u p a t o ...
Страница 132: ...91 Notes PD 42 50X795 English 91 10 12 04 9 25 27 AM d u p a t o ...
Страница 138: ...2 4 No YA100 d u p a t o r ...