(No.YA100)1-13
3.1.8 REMOVING THE TEMP. SENSOR PWB (Fig.2)
• Remove the REAR COVER.
(1) Disconnect the connector [
CN800V
] from the TEMP.
SENSOR PWB PWB .
(2) Remove the 1 screw
[O]
, then remove the TEMP.
SENSOR PWB.
3.1.9 REMOVING THE MAIN POWER PWB (Fig.2)
• Remove the REAR COVER.
(1) Disconnect the connector [
CN8001
] / [
CN8008
] / [
CN8006
]
/ [
CN8005
] / [
CN8003
] / [
CN8002
] / [
CN9001
] / [
CN8009
]
from the MAIN POWER PWB .
(2) Remove the 8 screws
[P]
, then remove the MAIN POWER
PWB.
(3) Remove the POWER PWB BRACKET and INSULATOR.
3.1.10 REMOVING THE SUB POWER PWB (Fig.2)
• Remove the REAR COVER.
(1) Disconnect the connector [
CN9001
] / [
CN9002
] / [
CN9005
]
from the SUB POWER PWB .
(2) Remove the 4 screws
[Q]
, then remove the SUB POWER
PWB.
(3) Remove the INSULATOR.
3.1.11 REMOVING THE DISPLAY SWITCH PWB (Fig.2)
• Remove the BACK COVER.
• Remove the SPEAKER HOLDER.
(1) Remove the 2 screws
[U]
and 3 screws
[V]
, then remove
the DISPLAY SWITCH PWB and CONTROL KNOB.
(2) Disconnect the connector [
CN000T
] from the DISPLAY
SWITCH PWB .
3.1.12 REMOVING THE DISPLAY LED PWB (Fig.2)
• Remove the BACK COVER.
• Remove the SPEAKER HOLDER.
• Remove the DISPLAY SWITCH PWB.
(1) Remove the 2 screws
[T]
, then remove the DISPLAY LED
PWB.
(2) Disconnect the connector [
CN000X
] from the DISPLAY
LED PWB .
3.1.13 REMOVING THE DD SPEAKER (Fig.2)
• Remove the REAR COVER.
• Remove the BACK COVER.
• Remove the SPEAKER HOLDER.
(1) Disconnect the connector [
CN60SR
] / [
CN60SL
] from the
AUDIO PWB .
(2) Remove the 4 screws
[U]
, then remove the DD SPEAKER.
3.1.14 REMOVING THE WOOFER SPEAKER (Fig.2)
• Remove the REAR COVER.
(1) Disconnect the connector [
CN60CB
] from the AUDIO
PWB.
(2) Remove the 6 screws
[V]
, then remove the WOOFER
SPEAKER UNIT.
(3) Remove the 8 screws
[W]
, then remove the DUCT
COVER.
(4) Remove the 12 screws
[X]
, then remove the WOOFER
BACK COVER.
(5) Remove the 8 screws
[Y]
, then remove the WOOFER
SPEAKER.
3.1.15 REMOVING THE PDP (PANEL) UNIT (Fig.2)
• Remove the REAR COVER.
• Remove the CHASSIS SHIELD BRACKET.
• Remove the TERMINAL COVER.
• Remove the CHASSIS BASE(with each PWB affixed on the
CHASSIS BASE).
• Remove the TEMP. SENSOR.
• Remove the MAIN POWER PWB.
• Remove the SUB POWER PWB.
(1) Disconnect the connector [
CN60SL
] / [
CN60CB
] /
[
CN60SR
] from the AUDIO PWB .
(2) Disconnect the connector [
CN00A
] / [
CN00C
] / [
CN00D
] /
[
CN00E
] / [
CN00Q
] / [
CN00T
] / [
CN00X
] / [
CN0V
] /
[
CNAH2
] from the DISPLAY INTERFACE PWB.
(3) Remove the 16 screws
[Z]
, then remove the BACK
BRACKET.
(4) Lift the PDP upright and remove it with enough care not to
impose shock to the PDP.
CAUTION:
• Two or more people are required to remove the PDP unit.
• The gas pouring port is covered with the protection
material.In operation, be careful not to damage the gas
pouring port.
• Do not touch the front side (glass) of the PDP with your
fingers.
d u p
a t o
r
Содержание I'Art Palette PD-42X795
Страница 129: ...88 PD 42 50X795 English 88 10 12 04 9 25 26 AM d u p a t o ...
Страница 130: ...89 PD 42 50X795 English 89 10 12 04 9 25 26 AM d u p a t o ...
Страница 132: ...91 Notes PD 42 50X795 English 91 10 12 04 9 25 27 AM d u p a t o ...
Страница 138: ...2 4 No YA100 d u p a t o r ...
