JVC I'Art 1003-TN-II-IM, Руководство пользователя

Страница: 69 / 88

Button Functions - Digital
69
iLINK/Timer
iLINK Timer has four menus - Timer, Timer List, Controller and Device.
By connecting a D-VHS VCR with an iLINK cable, you can set the timer easily.
Notes:
• If the iLINK is not connected, "Controller" and "Device" will not appear.
• The iLINK/Timer function will only work when you are receiving digital programming only.
• Before you set the timer, connect the D-VHS VCR with the iLINK cable and select the device.
See pages 22 and below.
• When you have set the timer, don't insert or disconnect the iLINK cable.
Device
To operate the iLINK timer and controller, select the D-VHS device.
Press the i
LINK
/T
IMER
button
√ ®
To Device
π †
To select your device connecting with iLINK
Press the OK button
A moves to the selected D-VHS number
Notes:
• If you do not select the device, you cannot use the iLINK timer functions.
• If the iLINK is not connected, this OSD and selected device will not appear.
• Even if you disconnect one device, it is still listed here. If you want to remove the device from
the list, select “Renumber”. The list will now only show devices that are connected.
Timer List Timer Controller
i.LINK
Device Selection Renumber
D-VHS 1
D-VHS 2
JVC
JVC
HM-DH30000
HM-DH40000
Controller Device
Select Operate
OK
Back
BACK
Exit
i.LINK/TIMER
1
2
Timer List Timer Controller
i.LINK
Device Selection Renumber
D-VHS 1
D-VHS 2
JVC
JVC
HM-DH30000
HM-DH40000
Controller
1
2
Device
Select Operate
OK
Back
BACK
Exit
i.LINK/TIMER
AV-56\65WP941 English 69 10/17/03, 1:03:12 PM