20
Setting the video channel/Setting the language
To view playback of a recorded tape,
or to watch a program selected by
the VCR's channel selector, the TV
must be set to channel 3 or 4 (video
channel).
NOTES:
• If the unit does not operate properly,
or No key operation (by the unit and/
or the remote control): Static electric-
ity, etc., may affect the player's opera-
tion. Disconnect the AC power cord
once, then connect it again.
• If no buttons are pressed for more than
60 seconds,the MENU screen will
retur n to normal TV operation
automatically.
• Both the VCR and the DVD have their
own menu options (See page 38).
2
Press POWER to turn on the DVD/VCR.
3
Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to
select the VCR mode. The VCR indicator on the front panel
will light.
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
When a TV is connected with the 75 ohm coaxial cable only.
4
Turn ON the TV and set to CH 3 or 4 to correspond with the
channel selected in step 1.
5
Press TV/VCR to select the VCR position.
The VCR indicator will appear in the display window.
6
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.
Setting the Video Channel
Setting the language
3
Press SET UP MENU.
The VCR menu screen will appear.
Press
or
to select “SYSTEM
SETUP”, then press ENTER.
If you use the unit for the first time
and press SET UP MENU, instead
of the main menu screen on the
right the “SYSTEM SETUP” menu
screen in step 2 may appear.
Press
or
to select the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
1
2
Press
or
to select the
“LANGUAGE” option, then press
ENTER.
4
Press SET UP MENU until the MENU screen is cleared.
á+/Ð/ENTER/MENUñ
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
á+/Ð/ENTER/MENUñ
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
ON OFF
ON OFF
DAYLIGHT SAVING TIME
á+/Ð/ENTER/MENUñ
Press and hold 3 or 4 on the remote for 3 seconds in standby
mode. The video channel will start to flash
for 3 seconds in the display window.
1
Содержание HR-XVC25U
Страница 67: ...67 MEMO ...
Страница 68: ...68 J2C51201B 03 05 U VICTOR COMPANY OF JAPAN LIMITED Printed in Thailand 0503 AH OR OR ...
