JVC HR-XV3EK, Инструкция по эксплуатации

Страница: 34 / 84

Filename [XV3EX_08DVD.fm]
Masterpage:Left+
34
EN
Page 34 22 August 2003 12:20 pm
OPERATIONS ON DVD DECK (cont.)
VFP function
— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programming,
picture tone or personal preference.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step
1 again.
1
Access the VFP setting menu.
2
Select the VFP mode.
Press
w e
repeatedly.
●
Each time you press
w e
, the VFP mode changes as follows:
NORMAL
]
CINEMA
]
USER 1
]
USER 2
]
(Back to the
beginning)
NOTE:
You cannot adjust the parameters of “NORMAL” and “CINEMA”.
To adjust picture appearance manually
3
Access the USER menu.
4
Select the parameter.
Press
rt
repeatedly to select a parameter you want to
adjust, then press OK .
●
Adjust gradually and confirm picture appearance results are as
preferred.
●
VFP menu disappears and the following pop-up window
appears on the TV screen.
5
Adjust the parameter.
Press
rt
repeatedly to change the setting, then press
OK .
●
The current VFP settings appear again.
6
Adjust the other parameters.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE .
To activate your setting
Press DVD PICTURE , then press
w e
repeatedly to select
“USER 1” or “USER 2” that you have changed the
parameters.
Press DVD PICTURE during
playback.
●
The current setting appears on
the TV screen.
NORMAL
: Select this normally.
CINEMA
: Suitable for movie.
USER 1
/
USER 2
:
You can adjust parameters that affect picture
appearance and store settings. Go to step
3 .
+0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+0
+0
+0
+0
+3
+0
Press
w e
repeatedly to
select “USER 1” or “USER 2”.
GAMMA
(–4 to +4):
Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
BRIGHTNESS
(–16 to +16):
Controls screen brightness.
CONTRAST
(–16 to +16):
Controls screen contrast.
SATURATION
(–16 to +16):
Controls screen colour depth.
TINT
(–16 to +16):
Controls screen tint.
SHARPNESS
(+0 to +3):
Controls screen sharpness.
Y DELAY
(–2 to +2):
Controls screen colour gap.
+0
USER 1
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+0
+0
+0
+0
+3
+0
+0 GAMMA
+0
GAMMA
XV3EX_01.book Page 34 Friday, August 22, 2003 12:21 PM