JVC HR-XV3EK, Инструкция по эксплуатации

Страница: 26 / 84

Filename [XV3EX_07S-VHS.fm]
Masterpage:Left+
26
EN
Page 26 August 22, 2003 12:20 pm
OPERATIONS ON VHS DECK (cont.)
Express Timer
Programming
If you do not know the S
HOW
V
IEW
number for the programme
you wish to record, use the following procedure to set your unit
to timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
B
Access the S
HOW
V
IEW
screen.
Press PROG .
C
Access the Programme screen.
D
Enter the programme start time.
E
Enter the programme stop time.
Press STOP +/– to enter the time you want recording to
stop.
●
Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press DATE +/– .
●
The current date appears on the TV screen. The date you enter
appears in its place.
G
Enter the channel position.
H
Set the tape speed.
Press
p
.
I
Set the VPS/PDC mode.
Press VPS/PDC ( number key “7” ) to select “ON” or
“OFF”.
●
If “VPS/PDC ON” is displayed on the TV screen, “VPS/PDC” is
set to “ON”.
●
If “VPS/PDC OFF” is displayed on the TV screen, “VPS/PDC”
is set to “OFF”.
墌
“VPS/PDC Recording” on page 25.
J
Return to the normal screen.
Press PROG or OK . “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears.
●
Repeat steps
B
–
J
for each additional programme.
K
Engage the unit’s timer mode.
Press
#
. The unit turns off automatically and “
#
”
appears on the front display panel.
●
To disengage the timer mode, press
#
again.
Before performing Express Timer Programming:
●
Make sure that the unit’s built-in clock is set properly.
●
Insert a cassette with the safety tab in place. The unit will
come on automatically.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the TV/VCR/DVD switch to the right.
Press START +/– . (If you’re
just starting out, “P1”
appears.)
Press START +/– to enter the
time you want recording to
start.
●
Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
Press PR +/– .
XV3EX_01.book Page 26 Friday, August 22, 2003 12:21 PM