February 3, 2003 7:03 pm
Page 13
— 13 —
Master Page: Right
Intelligent LP Recording (HR-V500E only)
When you set the tape speed to “IP”, the recorder automatically
switches to LP mode to allow complete recording if there is not
enough tape to record the entire programme while timer-
recording in SP mode.
For example,
recording a programme of 210 minutes in length
onto a 180-minute tape.
NOTES:
●
If you have programmed the recorder to timer-record 2 or more
programmes, do not use this function, but change the tape
speed manually during timer programming.
●
There may be some noise and sound disturbance where the tape
speed switches from SP to LP mode on the tape.
●
This function is not available during ITR (Instant Timer
Recording), and will not work properly with any tapes longer
than E-180 or with some tapes of shorter lengths.
Checking, canceling or changing programme
settings
A
Disengage timer recording standby mode
Press
1
.
B
Access Main Menu screen
Press
MENU
. Press
w
e
to select the icon
“REC”, then press
OK
. The programme list
appears.
C
Cancel or change programme setting
To cancel a programme,
press
rt
to
select the programme you want to delete,
then press
w
.
To change a programme,
press
rt
to
select the programme, then press
OK
.
Press
w
e
to select the item you want to
change, then press the
number keys
or
rt
to change the settings.
After confirming all information is correct, press
MENU
.
D
Return to normal screen
Press
MENU
.
E
Re-engage timer recording standby mode
Press
1
. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel.
Approximately 150 minutes
Approximately 60 minutes
SP mode
LP mode
Total 210 minutes
REC
HR-V500_200E-001EN.fm Page 13 Monday, February 3, 2003 7:04 PM