September 15, 2004 11:23 am
Page 11
— 11 —
Master Page: Right
Express Timer Programming
A
Access G-
CODE
screen
Press
PROG
.
B
Access programme screen
Press
START +/–
. (If you’re just starting
out, “P1” appears.)
C
Enter programme start time
Press
START +/–
to enter the time you
want recording to start.
●
Press and hold
START +/–
to move in
30-minute increments, or press and
release repeatedly to move 1 minute at
a time.
D
Enter programme stop time
Press
STOP+/–
to enter the time you want recording to stop.
●
Press and hold
STOP+/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter programme date
Press
DATE+/–
. (The current date appears on screen. The date you
enter appears in its place.)
F
Enter channel position
Press
PR +/–
.
G
Set tape speed
Press
p
(
SP/LP/EP
) to set the tape
speed.
H
Return to normal screen
After confirming all information is correct, press
PROG
or
OK
.
“PROGRAM COMPLETED” appears on the screen for about 5
seconds, then normal screen appears. If “PROGRAM
OVERLAPPED” appears on the screen, see page 12.
●
Repeat steps
1
–
8
for each additional programme.
I
Engage recorder’s timer mode
Press
#
. The recorder turns off automatically and “
#
” appears on
the display panel.
●
To disengage the timer, press
#
again.
NOTES:
●
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps
2
through
8
, press
WEEKLY
(
number
key “9”
) for weekly serials or
DAILY
(
number key “8”
) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
墌
12).
24H Express Timer Programming
You can programme a timer recording that starts within 24 hours.
A
Access 24HR Express Timer Programme display
Push
24H EXPRESS
#
. “ ” and start time starts blinking on the
display panel.
B
Set programme start time
Turn the
JOG
dial to the left or right. Then, push the
JOG
dial.
●
One click stop of the
JOG
dial changes the time in 5-minute
intervals.
C
Set programme stop time
“ ” and start time starts blinking on the display panel.
Turn the
JOG
dial to the left or right. Then, push the
JOG
dial.
●
One click stop of the
JOG
dial changes the time in 5-minute
intervals.
D
Set channel position
Channel number will start blinking.
Turn the
JOG
dial to the left or right. Then, push the
JOG
dial and
channel set number will start blinking.
●
You can cancel the setting at any time by pressing and holding
the
JOG
dial for more than 3 seconds. Repeat from the step
2
.
●
To set the tape speed, press
p
(
SP/LP/EP
). The current setting
for the tape speed appears on the display panel for about 5
seconds. Press
p
(
SP/LP/EP
) again to change the setting while
tape speed is displayed.
E
Engage recorder’s timer mode
Press
24H EXPRESS
#
.
The recorder turns off automatically and “
#
” appears on the
display panel.
NOTES:
●
If “Err” appears on the display panel, repeat the steps again.
●
When a menu screen is shown, you cannot use 24H Express
Timer programming function. Press
MENU
to return to normal
screen, and try again.
●
You can use 24H Express Timer programming function also
when the recorder is turned off.
●
For 24H Express Timer programming function, the program
overlap warning display does not appear even if some programs
overlap each other.
Check, cancel and replace programmes
A
Disengage timer mode
Press
#
, then press
1
.
B
Access Program Check screen
Press
"
.
C
Access Program screen
Press
"
again to check more
information. Each time you press
"
, the
next programme’s information appears.
Before performing the following steps:
●
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
●
Turn on the TV and select the VIDEO channel (or AV mode).
●
Select the appropriate colour system (
墌
13).
Before performing the following steps:
●
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
●
Select the appropriate colour system (
墌
13).
21:00
21:00
25.12
22:00
1
Programme start time indicator
Programme start time indicator
Programme stop time indicator
HR-S6970AG.AJ_EN.fm Page 11 Wednesday, September 15, 2004 11:23 AM
