advanced features
38
[
1
]
a
k
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-2 INPUT
VIDEO
L-2 INPUT Setting
The
L-2 IN/DECODER
connector accepts either a composite signal (regular video
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set
L-2 INPUT
to the appropriate mode depending on the output
signals of the connected unit.
get to the output/input set screen
Press
MENU
button. Move the
highlight bar to
OUTPUT/INPUT SET
using the
PR
and
PR
buttons and
press
OK
button (or ).
select mode
Move the highlight bar to
L-2 INPUT
using the
PR
and
PR
buttons. Press
OK
button (or ) to select the desired mode:
FOR L-2 INPUT
•
VIDEO
: If a connected device’s output is
compatible only with regular
video signals, set to
VIDEO
.
•
S-VIDEO
: If a connected device’s output is
compatible with Y/C signals, set to
S-VIDEO
. This setting will let you
take advantage of higher-quality
S-VHS pictures. (For connection,
be sure to use a 21-pin SCART
cable that is compatible with the
Y/C signal.)
return to normal screen
Press
MENU
button.
HR-S5975/5977EK-EN/p27-40
3/6/04, 12:57 PM
38
