advanced features
37
Editing
L-1 OUTPUT Setting
The
L-1 IN/OUT
connector delivers either a composite signal (regular video
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set
L-1 OUTPUT
to the appropriate mode depending on the type of
unit connected to the rear panel
L-1 IN/OUT
connector of this VCR.
get to the output/input set screen
Press
MENU
button
. Move the
highlight bar to
OUTPUT/INPUT SET
using the
PR
and
PR
buttons and
press
OK
button (or ).
select mode
Move the highlight bar to
L-1
OUTPUT
using the
PR
and
PR
buttons.
Press
OK
button (or ) to select the desired
mode:
FOR L-1 OUTPUT
•
VIDEO
: If a connected device’s input is
compatible only with regular
video signals, set to
VIDEO
.
•
S-VIDEO
: If a connected device’s input is compatible with Y/C signals, set to
S-VIDEO
. This setting will let you take advantage of higher-quality
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
return to normal screen
Press
MENU
button.
[
1
]
a
k
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-2 INPUT
VIDEO
F
button
HR-S5975/5977EK-EN/p27-40
3/6/04, 12:57 PM
37
