JVC HR-J255EA, Инструкция по эксплуатации

Страница: 25 / 40

EN
25
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU
SCREEN
1
Press MENU .
ACCESS FUNCTION SET
SCREEN
2
Press PUSH JOG
%fi
to
place the pointer next to
"FUNCTION SET", then
press
OK or PUSH JOG .
SELECT MODE
3
Press OK or PUSH JOG
to select either "ON" or
"OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU .
NOTE:
For safety, when Auto timer is set to "OFF", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press
TIMER .
%
Auto SP
→
LP Timer
If, when timer-recording in SP mode, there is not enough tape to
record the entire programme, the recorder automatically
switches to LP mode to allow complete recording.
For Example . . .
Recording a PAL-broadcast programme of 210 minutes in length
onto a 180-minute tape
NOTES:
●
If you have programmed the recorder to timer-record 2 or
more programmes, the second programme and those
thereafter may not fit on the tape if you set "AUTO SP
→
LP
TIMER" to "ON". In this case, make sure the mode is not
engaged, then set the tape speed manually during timer
programming.
●
In order to ensure that the recording fits on the tape, this
feature may leave a slight non-recorded section at the end of
the tape.
●
There may be some noise and sound disturbance at the point
on the tape where the recorder switches from SP to LP mode.
●
The Auto SP
→
LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work
properly with any tapes longer than E-180 or with some tapes
of shorter lengths.
Total 210 minutes
Approximately 150 minutes Approximately 60 minutes
SP mode LP mode
%
Make sure you set "AUTO SP
→
LP TIMER" to "ON" at the Mode
Set screen before the timer-recording starts.
ACCESS MAIN MENU
SCREEN
1
Press MENU .
ACCESS FUNCTION SET
SCREEN
2
Press PUSH JOG
%fi
to place the pointer next to
"FUNCTION SET", then press OK or PUSH JOG .
SELECT MODE
3
Press PUSH JOG
%fi
to
place the pointer next to
"AUTO SP
→
LP TIMER",
then press OK or PUSH
JOG to select "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU .
%
%
FUNCTION SET
AUTO TIMER OFF
O.S.D. ON
B.E.S.T. ON
AUTO SP
=
LP TIMER ON
[
5
/
∞
]
=
[MENU] : EXIT
FUNCTION SET
AUTO TIMER OFF
O.S.D. ON
B.E.S.T. ON
AUTO SP
=
LP TIMER OFF
[
5
/
∞
]
=
[MENU] : EXIT
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
[
5
/
∞
]
=
[MENU] : EXIT