JVC HR-J255EA, Инструкция по эксплуатации

Страница: 22 / 40

22
EN
1 2 3
4
0
6
7 8
5
9
1
4
3
2
Express Timer
Programming
Remember, the clock must be set before you can
programme the timer (
Z
pg. 8).
Before performing the following steps:
●
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
●
Turn on the TV and select the VIDEO channel (or AV mode).
ACCESS G-CODE SCREEN
1
Press PROG. .
ACCESS PROGRAMME
SCREEN
2
Press START +/– . (If you’re
just starting out, “P1”
appears.).
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
●
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
●
Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME DATE
5
Press DATE +/– . (The current date appears on screen.
The date you enter appears in its place.)
ENTER CHANNEL
POSITION
6
Press TV PROG +/– .
SET TAPE SPEED
7
Press SP/LP ( ) to set the tape speed.
TIMER RECORDING (cont.)
– P1 –
START STOP
–:– –
=
–:– –
SP
DATE TV PROG
– –.– – – –
[+/–]
=
[PROG] : EXIT
– P1 –
START STOP
21:00
=
–:– –
SP
DATE TV PROG
– –.– – – –
[+/–]
=
[PROG] : EXIT
– P1 –
START STOP
21:00
=
22:00
SP
DATE TV PROG
25.12 1
[+/–]
=
[PROG] : EXIT
START+/–
TV PROG+/–
PROG.
STOP+/–
DATE+/–
SP/LP