JVC HM-DR10000EK, Инструкция по эксплуатации

Страница: 45 / 80

45
Minimizing
Picture
Degradation
While Editing
(S-VHS/VHS Mode
Only)
Turn on the TV and select the AV mode.
Advantages Of S-VHS
Video Recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
●
From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
●
From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
●
From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
Picture Control
This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O. S. D. ON
DIRECT REC ON
AUTO SP
=
LP TIMER OFF
DIGITAL 3R ON
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
1 2 3
4 5 6
7 8 9
1
2
1
2
3
– –:– –
0
3
4
4
OK
MENU
ACCESS MAIN MENU
SCREEN
1
Press MENU .
ACCESS MODE SET
SCREEN
2
Move the highlighted bar (pointer) to "MODE SET" by
pressing
%fi
, then press OK or
#
.
SELECT PICTURE
CONTROL SET MODE
3
Move the highlighted bar
(pointer) to "PICTURE
CONTROL" by pressing
%fi
, then press OK or
#
to
select the desired mode.
AUTO : Provides
optimised picture
benefits of B.E.S.T.
Picture System.
Normally select
AUTO.
EDIT : Minimizes picture degradation during editing
(recording and playback).
SOFT : Reduces image coarseness when viewing
overplayed tapes containing a lot of noise.
SHARP : Clearer, sharper-edged picture when viewing
images with lots of flat, same-coloured surfaces
such as cartoons.
NOTES:
l
When you select EDIT, SOFT or SHARP, the selected
mode will not change until you select again.
l
When you select EDIT to dub tapes, be sure to select
AUTO after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU .
NOTES:
●
When B.E.S.T. is OFF, "PICTURE CONTROL" switches
automatically from AUTO to NORM.
●
Select EDIT when you are dubbing tapes. Refer to page 48.