JVC GZ-MG230 - EVERIO G SERIES HDD HARD DISK CAMCORDER 28X OPTICAL ZOOM, Инструкция по эксплуатации

Страница: 34 / 80

34
Cleaning
Before cleaning, turn off the camera and remove the battery pack and AC adapter.
L
To clean the exterior
Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild
soap and wring it out well before wiping. Then wipe again with a dry cloth.
L
To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage the monitor.
L
To clean the lens
Wipe gently with lens cleaning paper.
NOTES
•
Avoid using strong cleaning agents such as benzine or alcohol.
•
Mold may form if the lens is left dirty.
•
When using a cleaner or chemically treated cloth, refer to the cautions for each product.
Trouble Action
Recor
ding
The focus is not
adjusted automatically.
•
Set [FOCUS] to [AUTO].
•
Clean the lens and check the focus again.
–
34
The continuous
shooting speed is slow.
•
The continuous shooting speed will drop after repeated
continuous shots, depending on the recording media, or
under certain recording conditions.
–
Pla
ybac
k
Playback cannot be
performed.
•
Select the recording medium properly.
•
To watch images on a TV, set the TV’s input mode or
channel that is appropriate for video playback.
–
19
During video playback,
the
F
indicator fl ashes.
•
The temperature of the camera is increasing. If the
camera continues to heat up, playback may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
–
Other pr
ob
lems
Files cannot be deleted.
•
Remove protection from the fi les and delete them. 21
The data process is too
slow after the power
is switched on or the
mode is changed.
•
There is a large number of still images (approx. 1,000 or
more) stored in the recording medium. Copy the stored
fi les to other devices, and delete them from the recording
medium.
20
The microSD card
cannot be removed
from the camera.
•
Push the microSD card in a few more times. –
The [CREATE DVD]
screen is displayed in
the LCD monitor, and
no other operations
can be performed.
•
Another operation is being attempted while a DVD burner
that is turned on is connected. Turn off the camera
connected to the DVD burner, or disconnect the USB
cable.
–
The touch sensor or
sensor button does not
function.
•
Touch the sensors with your fi nger. The sensors do not
function if you touch them with your fi nger nail or with
gloves on.
6
Troubleshooting
(Continued)