58
Setting the Timer
To turn a timer off or on
When the system is turned on, press the
[TIMER]
key.
z
Press the power [
] key to turn the power OFF.
The
[STANDBY/TIMER]
indicator on the main unit lights orange.
If the indicator lights red, set the clock to the correct time.
z
z
12
12
The setting changes each time you press the
[TIMER]
key.
PROG. 1 on
PROG. 2 on
PROG. 1 and 2 on
Timer off
1 lit
2 lit
1 2 unlit
1 2 lit
The
[STANDBY/TIMER]
indicator will light red if there was
a power failure or the system was unplugged from the wall
outlet for some time. If this happens, set the system clock
to the correct time again. (P.60)
z
To modify the program settings, reconfigure the timer settings from
the beginning or press
[
C
]
to go back to the previous setting.
When the system is in Standby mode, you can confirm the timer
setting (on or off ) for 5 seconds by pressing the
[
F
]
key on the remote
control.
z
z
UX-J51_EN.indb 58
10.8.19 2:51:10 PM
