JVC GV-LS2 Скачать руководство пользователя страница 54

Страница: 54 / 172

Inf
ormation

Message

Check

Refer to

INCORRECT PASSWORD

• The two passwords entered on the change password

screen are different. Enter the same password in the
two fields.

–

USE AC ADAPTER

• When updating the firmware, connect the AC adapter.

page 12

NO UPDATES AVAILABLE

• Check if the update file is written in the correct folder

on the SD card.

–

UPDATE CORRUPTED

• Retrieve the firmware update file, and copy it to the SD

card.

–

INSTALLED UPDATE ON THIS
CAMERA CAN NOT BE USED

• Obtain the updater for the unit.

–

UPDATE IS SAME OR OLDER
VERSION. NO INSTALLATION
REQUIRED

• The firmware has already been updated. There is no

need to update it.

–

POWER TURNED OFF TO
CONSERVE BATTERY POWER

• The power is automatically turned off if "AUTO POWER

OFF" is set to "ON", the unit runs with the battery, and
no operation is performed for 5 minutes.

page 46

(12 HOURS LIMITATION)
RECORDING CANCELLED

• Recording stops automatically as it cannot be

performed for 12 or more consecutive hours.

–

ABNORMALITY OCCURRED IN
PAN TILTER

• Turn on the power again, and retry.

page 7

POWER TURNED OFF AS
CAMERA TEMPERATURE IS TOO
HOT

• Wait for a while, and turn on the power again.

page 6

PROCESS FAILED

• Setup, file deletion, etc. failed for some reason. Check

the connection, and retry.

–

Содержание GV-LS2













































































































































































Результаты поиска

Содержание GV-LS2

Отзывы:

JVC GV-LS2, Руководство пользователя, Страница: 54 / 172

Результаты поиска

Содержание GV-LS2

Отзывы: