JVC GV-LS2 Скачать руководство пользователя страница 50

Страница: 50 / 172

Inf
ormation

Problem

Check

Refer to

The access point (wireless LAN
router) cannot be found.

• Retry to connect in a better reception environment.

If there is a long distance or interference or if there
is a microwave or another wireless device nearby,
the communication speed may slow down or the
connection may not be established.

• If a stealth SSID is assigned to the access point, turn it

off.

• If there are many access points, the target access point

may not be found. In this case, set up manually.

page 21

The access point (wireless LAN
router) cannot be connected.

• If connected manually, check if the SSID and

authentication method are correct.

–

You do not know the target access
point (wireless LAN router).

• The initial setting of the access point is usually

described on the unit or in the instruction manual. Refer
to the unit or instruction manual.

–

Содержание GV-LS2













































































































































































Результаты поиска

Содержание GV-LS2

Отзывы:

JVC GV-LS2, Руководство пользователя, Страница: 50 / 172

Результаты поиска

Содержание GV-LS2

Отзывы: