JVC GV-LS2 Скачать руководство пользователя страница 52

Страница: 52 / 172

Inf
ormation

Problem

Check

Refer to

Camera images do not appear./
Camera images are gone.

• Camera images disappear if no operation is

performed for 120 hours. Perform one of the following
so that images reappear:

– Press the shooting button. (Shooting starts.)

– Operate the pantilter.

– Press the reload button.

– Disconnect and then connect the AV cable.

• Do not connect the AV cable to the camera and

pantilter simultaneously.

• Camera images disappear automatically as it cannot

transmit images 12 or more consecutive hours. Press
the reload button to display images.

–

The pantilter does not work./The
center position of the camera
differs.

• Connect the AC adapter to the pantilter. If the adapter

is connected to the camera, the pantilter does not
work.

•  Use the supplied LAN cable. Secure it with a stop.
•  Be careful not to twist the cable when securing it.
•  When the LAN cable is in contact with the floor, etc.,

the pantilter may not work properly due to cable
friction.

• The pantilter may not work properly when placed on

a slant.

• If a mic or the like is attached to the hot shoe, remove

it.

• Before attaching the camera to the pantilter, remove

the battery from the camera.

• Do not touch the camera during position adjustment.
• The center position of the camera may differ slightly

under circumstances such as at low temperatures;
however, this is not malfunction.

page 26

page 27
page 27
page 27

page 27

page 30

page 29

page 27

Содержание GV-LS2













































































































































































Результаты поиска

Содержание GV-LS2

Отзывы:

JVC GV-LS2, Руководство пользователя, Страница: 52 / 172

Результаты поиска

Содержание GV-LS2

Отзывы: