56
EN
TROUBLESHOOTING
(cont.)
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
24.
During recording, the date/
time does not appear.
25.
The indicators and
messages do not appear.
26.
Images on the LCD
monitor appear dark or
whitish.
27.
The rear of the LCD
monitor is hot.
28.
The indicators and the
image color on the LCD
monitor are not clear.
29.
The LCD monitor or
viewfinder indications
blink.
24.
•“DATE/TIME” is set to
“OFF” in the Menu Screen.
•Self-Recording is performed.
25.
•“ON SCREEN” is set to
“SIMPLE” or “TIME CODE”
is set to “OFF” in the Menu
Screen.
26.
•In places subject to low
temperature, images become
dark due to the characteristics
of the LCD monitor. When
this happens, the displayed
colors differ from those that
are actually recorded. This is
not a defect of the camcorder.
•When the LCD monitor's
fluorescent light reaches the
end of its service life,
images on the LCD monitor
become dark. Consult your
nearest JVC dealer.
27.
•The light used to illuminate
the LCD monitor causes it to
become hot.
28.
•This may occur when the
surface or the edge of the
LCD monitor is pressed.
29.
•Certain Fade/Wipe effects,
certain modes of Program AE
with special effects, “DIS”
and other functions that
cannot be used together are
selected at the same time.
24.
•Set “DATE/TIME” to “ON”
in the Menu Screen
(
墌
pg. 25).
•During Self-Recording, the
date/time does not appear
(
墌
pg. 15).
25.
•Set “ON SCREEN” to “LCD”
or “LCD/TV” and set
“TIME CODE” to “ON”
in the Menu Screen
(
墌
pg. 25, 32).
26.
•Adjust the brightness and
angle of the LCD monitor
(
墌
pg. 14, 15).
27.
•Close the LCD monitor to
turn it off or set the Power
Switch to “OFF”, and let the
unit cool down.
28.
————
29.
•Re-read the sections
covering Fade/Wipe effects,
Program AE with special
effects and “DIS”
(
墌
pg. 24, 26 – 28).
