JVC GR GR-DVL307, Инструкция по эксплуатации, Страница: 52 / 72

52
EN
PL
AY
OFF
TC 1 2 : 3 4
6w
PLAY
PAUSE
INSERT
REW
START/STOP
STOP
Insert Editing
You can record a new scene into a previously recorded
tape, replacing a section of the original recording with
minimal picture distortion at the in and outpoints. The
original audio remains unchanged.
NOTES:
●
Before performing the following steps, make sure that
“TIME CODE” is set to “ON” in the Menu Screen
(
墌
pg. 32).
●
Insert Editing is not possible on a tape recorded in the LP
mode or on a blank portion of a tape.
●
To perform Insert Editing while watching in the
television, make connections (
墌
pg. 34).
1
Play back the tape, locate the Edit-Out point and
press
PAUSE (
6
). Confirm the time code at this point
(
墌
pg. 33).
2
Press REW (
2
) until the Edit-In point is located, then
press PAUSE (
6
).
3
Press and hold INSERT (
w
) on the remote control,
then press PAUSE (
6
). “
6w
” and the Time Code
(min.:sec.) appear and the camcorder enters Insert-
Pause mode.
4
Press START/STOP to begin editing.
•Confirm the insert at the time code you checked in
step 1 .
•To pause editing, press START/STOP . Press it again
to resume editing.
5
To end Insert Editing, press START/STOP , then STOP
( 5 ).
NOTES:
●
Program AE with special effects (
墌
pg. 28) can be used
to spice up the scenes being edited during Insert Editing.
●
During Insert Editing, the date and time information
changes.
●
If you perform Insert Editing onto a blank space on the
tape, the audio and video may be disrupted. Make sure
you only edit recorded areas.
●
During Insert Editing, when the tape moves to scenes
recorded in the LP mode or a blank portion, Insert Edting
stops (
墌
pg. 61).
Power Switch
Lock Button
Display
Remote sensor
RM-V716U
(Provided with
GR-DVL507 only)
(Provided with
GR-DVL307
only)
OR
USING THE REMOTE CONTROL UNIT
(cont.)