72
EN
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
31.
•During playback of the
unrecorded portion, High-
speed Search and still
playback, viewfinder
indications appear distorted.
This is not a defect.
32.
————
33.
•A malfunction of some kind
has occurred. In this case
the camcorder’s functions
become unusable.
34.
•The temperature of the
battery is extremely high/
low.
•Charging is difficult in places
subject to extremely high/
low temperatures.
35.
•This occurs when recording
in the LP mode is not
available. After the indicator
blinks, the recording mode
switches to “SP” and
recording goes on.
36.
•This is not a malfunction.
31.
————
32.
• Check the section of the
manual that explains the
viewfinder indications
(
Z
pg. 78 – 80).
33.
• Remove the power supply
(battery pack, etc.) and
press RESET button, and
wait a few minutes for the
indication to clear. When it
does, you can resume using
the camcorder.
If the indication remains
even though you repeat the
above two or three times,
please consult your nearest
JVC dealer.
34
• To protect the battery, it is
recommended to charge it
in places with a temperature
of 10°C to 30°C (50°F to
86°F) (
Z
pg. 11).
35.
————
36.
• By recording with Digital
Image Stabilizer set to “ON”
(
Z
pg. 32) this can be
avoided.
31.
The viewfinder indications
are distorted.
32.
An unusual mark appears
in the viewfinder.
33.
An error indication
(E01 — E06) appears in
the viewfinder.
34.
The charge indicator on
the AC Power Adapter/
Charger does not light.
35.
The recording mode
indicator “LP” blinks on
the viewfinder.
36.
When the image is printed
from the printer, a black
bar appears at the bottom
of the screen.
TROUBLESHOOTING
(Cont.)
