EN
51
OFF
P
L
A
Y
A
M
5S
T
W
PLAYBACK EFFECT
STROBE
CLASSIC FILM
MONOTONE
SEPIA
4
1
2
3
OFF
4
B/W
1
START PLAYBACK
Press the Play button (
4
).
2
ACCESS PLAYBACK EFFECT SELECT
MENU
Point the remote control at the camcorder’s
remote sensor and press EFFECT. The PLAY-
BACK EFFECT Select Menu appears.
3
SELECT PLAYBACK EFFECT
Move the pointer and highlight bar to the
desired effect by pressing EFFECT. The selected
function is activated and after 2 seconds the
menu disappears.
NOTES:
●
To deactivate the selected effect, press EFFECT
ON/OFF on the remote control. Pressing it again
re-activates the selected effect.
●
Repeat from step 2 when you want to change the
selected effect.
●
When “MONOTONE” or “SEPIA” is activated, the
“MULTI 4” and “MULTI 9” Snapshot modes
(
Z
pg. 29) are not available.
The effects that can be used during playback are
Classic Film, Monotone, Sepia and Strobe
. The
effects work the same in playback as they did in
recording. Refer to page 42 for more information.
Playback Effects
To use these playback effects, the optional RM-V712U remote control (included in the VU-V63KITU Station
Kit) is necessary. These effects allow you to be creative with the playback picture. You can use any one of
the 4 effects.
EFFECT
EFFECT ON/OFF
PLAYBACK EFFECT Select
Menu
PLAY
Lock button
Power Dial
Remote sensor
Play button
RM-V712U
(optional)
