JVC GR-DV1800, Инструкция по эксплуатации

Страница: 41 / 98

EN
41
PLAYBACK
Advanced Features For Video
M D O E SOUND
M D O E 12B I T
RO SYNCH
ODE REC M
I N UT S / AV P
COPY
STEREO –
SOUND 1
SP
OF F
OF F
–
–
–
–
–
N RETUR
O . O
Using Menus For Detailed Adjustment
The following procedure applies to all except Synchro
Comp ( pg. 69, 70).
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select the desired function
menu, and press it. The selected function menu appears.
4
Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6
Rotate the MENU wheel to select “ 1 RETURN” and
press it twice to close the Menu Screen.
Display
Power Switch
MENU Wheel
pg. 42.
pg. 42.
pg. 70.
Allows you to set the video recording
mode (SP or LP) depending on your
preference (
pg. 15).
It is recommended you use “REC
MODE” in the “
VIDEO” Menu
when using this camcorder as a
recorder during dubbing
(
pg. 58, 59).
ON : Enables dubbing of images
recorded on a tape to a memory
card (
pg. 60).
OFF : Enables snapshots to be taken
during video playback.
ON : Enables audio/video signal
input from the AV and S-VIDEO
connectors (
pg. 58).
OFF : Enables audio/video signal
output to a TV, VCR, etc. via the AV
and S-VIDEO connectors
(
pg. 54, 58).
Makes a beep or melody sound/
activates the shutter sound effect.
Turns on/off the tally lamp.
Starts automatic demonstration.
Makes the camcorder’s indications
appear/disappear from the
connected TV screen.
Makes the date/time appear/
disappear on the camcorder.
Makes the time code appear/
disappear on the camcorder.
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
S/AV INPUT
BEEP*
TALLY*
DEMO MODE*
ON SCREEN*
DATE/TIME*
TIME CODE*
Menu Screen
Lock Button
Recording Start/Stop Button
* Each setting is linked with “ DISPLAY” or
“ SYSTEM”, which appears when the
Power Switch is set to “ ” ( pg. 31). The
parameters are the same as in the description
on pg. 31.
NOTES:
●
It is also possible to change the ON SCREEN
settings by pressing
DISPLAY on the remote
control (provided).
●
“REC MODE” can be set when the Power
Switch is set to “
” or “ ” ( pg. 15, 29).
●
When “S/AV INPUT” is set to “ON”,
camcorder playback cannot be viewed on
the AV output.
VIDEO
DISPLA
Y
SYSTEM