26
EN
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Dual Shooting
Lets you record images on a tape and store still images in a
memory card simultaneously. In other words, it is possible
to store still images in the memory card without
interrupting image recording on the tape.
1
Set the Shooting Mode Switch to “VIDEO”, then set
the Power Switch to “
” while pressing down the
Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Set “CAMERA MODE” to “DUAL” in the Menu
Screen (
pg. 28, 29).
3
While recording to a tape, press
SNAPSHOT
halfway.
A still image is displayed in the lower right corner of
the screen where the video image being recorded is
displayed.
•At this moment, if you release
SNAPSHOT
,
snapshot recording will be canceled.
4
Press
SNAPSHOT
fully. The displayed still image is
stored in the memory card.
NOTES:
●
If
SNAPSHOT
is pressed in the Record-Standby mode,
only a still image is stored in the memory card. Video
recording does not take place.
●
If
SNAPSHOT
is pressed when “DIS” is set to “ON”
(
pg. 29), the Stabilizer will be disabled.
●
The Stabilizer is less effective in the DUAL mode than in
other modes.
●
Still images are stored in the memory card in VGA mode
file size (
pg. 14).
●
When “CAMERA MODE” is set to “DUAL”, all Fade/
Wipe Effects and some Program AE with special effects
cannot be used (
pg. 34 – 37).
●
The optional flash (
pg. 83) will not light during video
recording.
Power Switch
FOCUS Button
Video image
Shooting
Mode Switch
Released position
Still image
Fully-pressed
position
Half-pressed
position
SNAPSHOT Button
Lock Button
FOCUS Ring
SNAPSHOT
Button
