FEATURES FOR RECORDING
38
EN
MasterPage: Left
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
1
Set the Power Switch to “
M
”.
2
Set “
v
” to the desired mode. (
墌
pg. 27)
●
The WIPE/FADER menu disappears and the
effect is reserved.
●
The selected effect indicator appears.
3
Press the Recording Start/Stop Button to
activate the Fade-in/out or Wipe-in/out.
To deactivate the selected effect
Select “OFF” in step
2
. The effect indicator
disappears.
NOTES:
●
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
●
Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
(See the right column.) In this case, the selected
indicator blinks or goes out.
WIPE/FADER
OFF
: Disables the function. (Factory-preset)
FADER–WHITE
: Fade in or out with a white
screen.
FADER–BLACK
: Fade in or out with a black
screen.
FADER–B.W
: Fade in to a colour screen
from a black and white screen, or fade out from
colour to black and white.
WIPE–CORNER
: Wipe in on a black screen
from the upper right to the lower left corner, or
wipe out from lower left to upper right, leaving a
black screen.
WIPE–WINDOW
: The scene starts in the
centre of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the centre.
WIPE–SLIDE
: Wipe in from right to left, or
wipe out from left to right.
WIPE–DOOR
: Wipe in as the two halves of
a black screen open to the left and right,
revealing the scene, or wipe out and the black
screen reappears from left and right to cover the
scene.
WIPE–SCROLL
: The scene wipes in from
the bottom to the top of a black screen, or wipes
out from top to bottom, leaving a black screen.
WIPE–SHUTTER
: Wipe in from the centre
of a black screen toward the top and bottom, or
wipe out from the top and bottom toward the
centre leaving a black screen.
1
Set the Power Switch to “
M
”.
2
Set “
r
” to the desired mode. (
墌
pg. 27)
●
The PROGRAM AE menu disappears and the
selected effect is activated.
●
The selected effect indicator appears.
To deactivate the selected effect
Select “OFF” in step
2
. The effect indicator
disappears.
NOTES:
●
Some modes of Program AE with special effects
cannot be used during Night-Scope.
●
When a subject is too bright or reflective, a vertical
streak may appear (smear phenomenon). Smear
phenomenon tends to occur when “SPORTS” or
any mode of “SHUTTER 1/250 – 1/4000” is
selected.
●
Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
(See the left column.) In this case, the selected
indicator blinks or goes out.
Wipe Or Fader Effects
Program AE With Special Effects
GR-DF428AH.book Page 38 Friday, March 18, 2005 5:07 PM
Содержание GR-DF428
Страница 6: ...6 EN GETTING STARTED Index 8 7 O S R Q L M N V U e d T W X Y Z a K P g f 9 0 c b 6 2 1 3 5 4 h i ...
Страница 54: ......
Страница 55: ......
Страница 56: ...EN AH Printed in Malaysia 0305FOH ID VM 2005 Victor Company of Japan Limited GR DF428 ...