JVC GR-DF428, Инструкция по эксплуатации

Страница: 29 / 56

EN
29
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
ADV
A
N
C
ED
F
EA
T
UR
ES
MANUAL
The “
q
MANUAL” settings are effective only
when the Power Switch is set to “
M
”.
[ ] = Factory-preset
OFF : Disables the function.
[ON ] : To compensate for unstable images
caused by camera-shake, particularly at high
magnification.
NOTES:
●
Accurate stabilisation may not be possible if hand
shake is excessive, or depending on the shooting
condition.
●
The “ ” indicator blinks or goes out if the
Stabiliser cannot be used.
●
Switch off this mode when recording with the
camcorder on a tripod.
[OFF] : Disables 5-Second Recording.
5S : Enables 5-Second Recording. (
墌
pg. 33)
Anim. : Allows you to record a few frames only.
By using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.
[OFF] : Disables the function.
ON : When the distance to the subject is less
than 1 m, set “TELE MACRO” to “ON”. You can
shoot a subject as large as possible at a
distance of approx. 60 cm.
NOTE:
Depending on the zoom position, the lens may go out
of focus.
[OFF] : Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio.
CINEMA : Inserts black bands at the top and
bottom of the screen. The indicator appears.
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are
cut and the screen ratio becomes 16:9. When
using this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording
on 4:3 TVs/LCD monitor/viewfinder, black bands
are inserted at the top and bottom of the screen
and the image appears like a letter boxed 16:9
movie.
SQUEEZE : For playback on TVs with an
aspect ratio of 16:9. Naturally expands the
image to fit the screen without distortion. The
indicator appears. When using this mode,
refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/
LCD monitor/viewfinder, the image is elongated
vertically.
[OFF] : Disengages the function.
ON : Helps cut down on noise created by
wind. The “ ” indicator appears. The quality of
the sound will change. This is normal.
SYSTEM
The “
s
SYSTEM” functions which are set when
the Power Switch is set to “
M
” are also applied
when the Power Switch is set to “PLAY”.
[ ] = Factory-preset
OFF : Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP : The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (
墌
pg. 34)
[MELODY] : Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect. (
墌
pg. 34)
DIS
5S
TELE MACRO
WIDE MODE
WIND CUT
BEEP
GR-DF428AH_06Advanced.fm Page 29 Tuesday, March 22, 2005 4:55 PM