JVC GR-D850AH, Инструкция по эксплуатации

Страница: 28 / 104

28
EN
D.S.C. Recording & Playback
To Print By Selecting Still Images
And Number Of Prints
1 1
Perform steps
1
–
4 4
in “To Print All Still
Images (One Print For Each)” ( 27).
2 2
Select “CURRENT”, press SET . The DPOF
screen appears.
3
Press £ or ¤ to select the desired fi le.
4 4
Press ¢ or ¡ to select the number
indication (00), and press SET .
5 5
Select the number of prints by pressing ¡
to increase the number, or ¢ to decrease
the number, and press SET .
• Repeat steps
3 3
through
5 5
for the desired
number of prints.
• The number of prints can be set up to 15.
• To correct the number of prints, select the
image again and change the number.
6 6
Select “RETURN”, press SET . The “SAVE?”
appears.
• If you did not change any settings in step
3 3
through
5 5
, the DPOF Menu reappears.
7 7
Select “EXECUTE”, press SET .
• To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1 1
Perform steps
1
–
4 4
in “To Print All Still
Images (One Print For Each)” ( 27).
2 2
Select “RESET”, press SET . The DPOF
screen appears.
3 3
Select “EXECUTE”, press SET .
• To cancel selection, select “RETURN”.
• The number of prints is reset to 0 for all still
images.
Caution:
While performing the above, never disconnect
power, as this may cause the memory card to
be corrupted.
Note:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with
“DIS” deactivated (
30) this can be avoided.
Initialising A Memory Card
You can initialise a memory card any time.
After initialising, all fi les and data stored in
the memory card, including those which have
been protected, are cleared.
1 1
Perform steps
1
–
3 3
in “Normal Playback
Of Images” ( 25).
2
Press MENU .
3
Select “MEMORY CARD” ( ).
4 4
Select “FORMAT”, press SET . The
FORMAT menu appears.
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
CANCEL
5 5
Select “EXECUTE”, press SET . The
memory card is initialised.
• When initialisation is fi nished, “NO
IMAGES STORED” appears.
• To cancel initialisation, select “CANCEL”.
GR-D850&870AH_EN.indb 28 GR-D850&870AH_EN.indb 28 12/6/2007 1:11:23 PM 12/6/2007 1:11:23 PM