EN
31
ADDITIONAL FEATURES FOR D.S.C.
MasterPage: Start_Right
3
Press , ,
or
to
select “DPOF”, and press
SET
. The DPOF Menu
appears.
4
Press
or
to
select
“ALL 1”, and press
SET
or
. The DPOF screen
appears.
5
Press
or
to
select
“EXECUTE”, and press
SET
. The normal playback
screen appears.
●
To cancel selection, select
“RETURN”.
To Print By Selecting Still Images And
Number Of Prints
1
Perform steps
–
2
Press
or
to
select
“CURRENT”, and press
SET
or
. The DPOF
screen appears.
3
Press
or
to
select
the desired file.
4
Press
or
to select the number indication
(00), and press
SET
.
5
Select the number of
prints by pressing
to
increase the number, or
to decrease the number,
and press
SET
.
●
Repeat steps
through
for the desired number of
prints.
●
The number of prints can be set up to 15.
●
To correct the number of prints, select the image
again and change the number.
6
Press
or
to
select
“RETURN”, and press
SET
. The “SAVE?”
appears.
●
If you did not change any
settings in step
through
, the
DPOF
Menu
reappears.
7
Press
or
to select “EXECUTE” to save
the setting you have just made, and press
SET
.
●
To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps
–
2
Press
or
to select “RESET”, and press
SET
or
. The DPOF screen appears.
3
Press
or
to select “EXECUTE”, and
press
SET
. The normal playback screen
appears.
●
To cancel selection, select “RETURN”.
●
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
You can initialise a memory card any time.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the
VIDEO/MEMORY
Switch to
“MEMORY”.
2
Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
3
Press
MENU
. The Menu Screen appears.
4
Press , ,
or
to select “FORMAT”, and
press
SET
. The FORMAT
screen appears.
5
Press
or
to
select “EXECUTE”, and
press
SET
. The memory
card is initialised.
●
When initialisation is finished, “NO IMAGES
STORED” appears.
●
To cancel initialisation, select “RETURN”.
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialisation. If the
memory card becomes corrupted, initialise it.
Initialising A Memory Card
F
GR-D650E-640E.book Page 31 Tuesday, May 30, 2006 11:31 AM