— 12 —
Master Page: Left
Before loading or unloading memory cards
or turning off the PC, first disconnect the
USB cable and turn off the camcorder.
1
Confirm that “
” is not
currently displayed on the LCD
monitor of the camcorder.
●
If “
” is currently displayed,
wait until it disappears before
proceeding.
2
Double-
click the
[Safely
Remove Hardware] or [Unplug
or Eject Hardware] icon in the
status bar.
The [Safely Remove Hardware] or
[Unplug or Eject Hardware] dialog box
appears.
Windows
®
XP
: If not, wait a while then
go to step
5
.
3
Select [USB Mass Storage
Device] or [USB Disk], and then
click [Stop].
●
Windows
®
2000/XP
●
Windows
®
Me
The [Stop a Hardware device] dialog
box appears.
4
Click [OK].
Windows
®
2000/Me
: If a message
indicating that the device can be safely
removed appears, click [OK] and then
click [Close].
●
Windows
®
2000/XP
●
Windows
®
Me
*The model name depends on the
connected camcorder.
5
Disconnect the USB cable.
6
Set the camcorder’s Power
Switch to “OFF”.
The camcorder turns off.
Disconnecting the USB Cable
(Windows
®
)
M6D1.book Page 12 Thursday, June 29, 2006 12:06 PM