JVC GR-AXM710, Инструкция по эксплуатации

Страница: 58 / 84

58
EN
INDEX
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
DELETE
4
RETURN
MENU
SELECT
ALL
EXIT
DELETE
CANCEL
ENTER
DELETE
01
04
03
06
02
05
<
DELETE
>
N E X T
Delete
When the memory in which still images are stored
becomes full, the number of remaining shots available
reaches “0” (blinking). In this situation it becomes
impossible to take your next shot. Delete some still images
already stored in memory to make room for new shots.
1
SELECT OPERATION SYSTEM AND
MODE
Set the System Select Switch to “D.S.C.”, and set the
Power Switch to “PLAY”.
2
ACCESS MENU SCREEN
Press MENU. The Menu Screen appears.
3
ACCESS “DELETE” MENU
Rotate the Select Dial to move the highlight bar to
“DELETE”, and press it. The DELETE Menu appears.
4
SELECT DELETE MODE
Rotate the Select Dial to move the highlight bar to
“SELECT” or “ALL”, then press it.
To select a still image by checking the still images
stored in memory . . .
.... select “SELECT”, then go to step 5.
To delete all the still images stored in memory at
once without checking them . . .
.... select “ALL”, then go to step 6.
To quit the Delete Mode . . .
.... rotate the Select Dial to place the highlight bar
on “EXIT”, then press it twice.
5
SELECT ON DELETE SELECT MENU
Rotate the Select Dial to move the frame to the
desired still image, then press it. “
” appears above
the selected still image. When you have finished
selecting all the desired still images, rotate the Select
Dial upward to place the highlight bar on “NEXT”,
then press the Select Dial.
•On the Delete Select Menu, the still images are
displayed six at a time. To delete the still images
that follow the 6th one, rotate the Select Dial to
move the frame from No. 1 to No. 6, then rotate it
further downward. The frame is moved to the 7th
still image automatically. Perform the same
procedure for still images that follow the 7th one.
D.S.C. PLAYBACK
Advanced Features (cont.)
Menu Screen
Delete Select Menu
In case of
“SELECT”
DELETE Menu
Delete Execute Menu
In case of “ALL”
Menu Screen
Power Switch
MENU Button
Select Dial
System
Select Switch
Display