EN
25
NOTES:
●
The picture mode’s factory-preset is FINE.
●
Some sample images have been stored in the built-in memory at the factory.
If you wish to delete them, first remove the “Protect” function (
Z
pg. 57), then perform the “Delete”
function (
Z
pg. 58).
●
To store the still images you shot, we recommend that you transfer them to a computer and save them on
disk (
Z
pg. 53), or transfer them to a VCR connected to the camcorder and record them onto a tape.
●
When the Power Switch is set to “CAMERA” (“AUTO” or “PRO.”) and the LCD monitor is opened at an
angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically
to save power. When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be
difficult to see. If this happens, we recommend that you use the viewfinder.
●
When the remaining number indicator displays “0” (blinking), it is not possible to continue storing pictures
until you delete some shots to make room for new ones. Perform “DELETE” function in the Menu Screen
to remove pictures you do not need (
Z
pg. 58).
●
The Picture Mode can be switched to either “FINE”or “STANDARD”. Since the remaining number of shots
available depends on the selected Picture Mode, switching the Picture Mode will vary this number.
●
The LENS COVER warning blinks for approx. 5 seconds when the camcorder is turned on with the cover
closed.
●
When SNAPSHOT is pressed with the System Select Switch set to “VIDEO”, the picture is stored in the
camcorder's built-in memory (in the Snapshot mode selected in the “VIDEO” system) and also onto the tape
(if a tape is in the camcorder) (
Z
pg. 26).
●
When you shoot in a dark environment, the still image will become coarse and its true colors will be lost.
