EN
31
MENU
S.LX
To record a subject in a dark lit environment. When it is more
convenient to shoot the subject with a brighter image even if
the picture becomes slightly coarse. Automatically selected
when the PROGRAM AE select dial is set to AUTO LOCK
mode. (S.LX : Super LoLux)
NORM
To record a subject in a dimly lit environment. When it is
more convenient to shoot with a less coarse picture although
the subject becomes slightly dark. This setting is suitable for
measuring sensitivity conforming to EIA-639 (EIA* Standard
for Low Light Sensitivity Measurement)
*EIA : Electronic Industries Association
OFF
Allows you to shoot dark scenes with no picture brightness
adjustment.
OFF
Usually set to this position.
ON
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a
distance more than 1m to the subject, the lens is out of focus
at the maximum telephoto setting. When set to “ON”, you
can shoot a subject as large as possible at a distance of
approx. 60 cm.
•Depending on the zoom position, the lens may go out of
focus.
This feature allows you to set the parameters for Self-Timer
(
Z
pg. 32) and Time-Lapse recording (
Z
pg. 33).
This feature allows you to set the parameters for Animation
and Time-Lapse recording (
Z
pg. 33).
This number is necessary when connecting the camcorder to a device such
as a computer using the J terminal (JLIP).
The numbers range from 01 to 99. Factory setting is 07.
ON
The tally lamp comes on to signal the start of rcording.
OFF
The tally lamp remains off at all times.
Allows you to input characters. (
Z
pg. 27).
Allows you to set the current date and time (
Z
pg. 11).
= Factory setting and when the PROGRAM AE Select Dial is set to AUTO LOCK
NOTE:
During shooting in low light, Auto Focus accuracy may decrease even when Gain Up is used. In this case,
use Manual Focus (
Z
pg. 23).
Date/Time
Set Character
Tally
JLIP ID NO.
Rec Time
Interval Timer
Tele Macro
Gain Up
OFF
15s
30s
1min
5min
OFF
1/4s
1/2s
1s
5s
