EN
29
M.W.B.
MWB
No indication
(Auto)
MWB
Manual White Balance Adjustment
(M.W.B.)
This camcorder’s Automatic Color Temperature system
senses the color temperature of the ambient lighting for
automatic white balance adjustment. However, precise
color adjustment is not possible under the following
conditions:
•When an object is in various shades of the same color.
•When a predominantly red or brown object is being
shot outdoors.
In these cases, use the camcorder’s built-in preset filters
for white balance adjustment.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
SELECT FUNCTION
2
Press SEL. reapeatedly until “
M.W.B.
” appears.
SELECT WHITE BALANCE
3
Press SET (Manual White Balance) until the
required indication appears in the LCD monitor or
the viewfinder.
“MWB” .... With a memorized personal White
Balance setting (see below)
“
” ......... Outdoors on sunny day
“
” ........ Outdoors on cloudy day
“ ” ......... Light source is halogen or tungsten lamp
MWB
MWB sets the color temperature for the subject’s light
source so you can shoot with natural colors that are
unaffected by surroundings, even when there are
multiple subjects with different color temperatures.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
ADJUST FOCUS
2
Point the camcorder at a white, flat object such as a
sheet of white paper, and adjust focus manually
(
Z
pg. 23).
ADJUST WHITE BALANCE
3
Press SET until “MWB” appears, then press and hold
SET for more than 3 seconds.
•“MWB” blinks in the LCD monitor or the view-
finder during adjustment, then stops blinking but
stays lit when adjustment is complete.
NOTES:
●
To switch to automatic white balance
adjustment, press SET until the indication
disappears, or turn the PROGRAM AE select
dial to “AUTO LOCK”.
●
Re-adjust the White Balance when the
lighting has changed, when the camcorder
has been turned off and on again, or when
the PROGRAM AE select dial’s position has
been changed.
●
When adjusted by putting colored paper in
front of the subject in step 2 (“ADJUST
FOCUS”), this unit makes its color tempera-
ture standard for automatic white balance.
So you can enjoy shooting with different
colors. For example, when adjusting with
red, blue or yellow colors, the image
becomes the color which aproximates to
green, orange or purple respectively.
SET
SEL.
PROGRAM AE
select dial
LCD monitor
or viewfinder
White balance
mode indicator
