30
ENGLISH
To select the amplifier gain control
—AMP.GAIN
You can change the maximum volume level of
this unit. When the maximum power of the
speakers is less than 50 W, select “LOW
POWER” to prevent them from being damaged.
When shipped from the factory, “HIGH POWER”
is selected.
• LOW POWER: You can adjust the volume
level from “VOL 00” to
“VOL 30.”
Note:
If you change the setting from
“HIGH POWER” to “LOW
POWER” while listening at a
volume level more than 30, the
unit automatically changes the
volume level to “VOL 30.”
• HIGH POWER: You can adjust the volume
level from “VOL 00” to
“VOL 50.”
• OFF:
Only for KD-AR800:
Deactivates the built-in
amplifier. (Sounds come out
only from external amplifiers
connected to Line Out plugs).
To turn the slot light on or off
—SLOT LIGHT
You can turn off the slot light if you do not want
the illumination each time you insert/eject the
disc or when you change the control panel angle.
When shipped from the factory, slot illumination
is activated.
• ON:
Activates the illumination.
• OFF: Deactivates the illumination.
To select the external component to use
—EXTERNAL IN
(only for KD-AR800/KD-G800)
You can connect the external component to the
CD changer jack on the rear using an adapter
specially designed for the external component.
When shipped from the factory, CD changer is
selected as the external component.
• CHANGER: To use the CD changer.
• LINE IN:
To use the external component
other than CD changer (only for
KD-G800).
• SIRIUS:
To use the JVC SIRIUS Radio.
Notes:
• Only for KD-G800: For connecting the Line Input
Adapter KS-U57 and the external component, refer
to the Installation/Connection Manual (separate
volume).
• For connecting the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate volume).
To turn the tag display on or off
—TAG DISPLAY
An MP3/WMA file can contain file information
called “ID3 Tag” where its album name,
performer, track title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). If both ID3v1
and ID3v2 are recorded on a disc, ID3v2
information will be shown.
When shipped from the factory, “TAG DISP ON”
is selected.
• TAG DISP ON: Turns on the ID3 tag display
while playing MP3/WMA files.
• If an MP3/WMA file does not
have ID3 tags, folder name
and file name appear.
Note:
Only for KD-AR800/KD-G800:
If you change the setting from
“TAG DISP OFF” to “TAG
DISP ON” while playing an
MP3/WMA file, the tag display
will be activated when the next
file starts playing.
• TAG DISP OFF: Turns off the ID3 tag display
while playing MP3/WMA files.
(Only the folder name and file
name can be shown.)
EN26-33_KD-AR800_G800[J]f.p65
8/12/03, 11:10 AM
30
Содержание G800 - KD Radio / CD
Страница 135: ...Instructions CD RECEIVER KD AR800 KD G800 KD G700 ...
