SETTINGS
43
Menu items
Selectable settings, [reference page]
Sound
Fader/Balance
Adjust fader—speaker output balance between the front and
rear speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader to the center
(
00
).
Adjust balance—speaker output balance between the left and
right speakers.
• Leftmost—left only
• Rightmost—right only
Volume Adjust
Adjust and store auto-adjustment volume level for each
source, comparing to the FM volume level. The volume level
will automatically increase or decrease when you change the
source.
• –12
to
+12
; Initial
00
Subwoofer
Adjust the settings below in the submenu:
• Phase
: Subwoofer phase. Select either “
Normal
” or
“
Reverse
,” which reproduces a better sound.
•
Level
*
11
: Subwoofer output level. Level:
–6
to
+8
; Initial
0
High Pass Filter
Through:
Select when the subwoofer is not connected.
On:
Select when the subwoofer is connected.
Crossover
Adjust the crossover frequency between the front/rear
speakers and the subwoofer.
80Hz, 120Hz, 150Hz
Amplifi er Gain
You can change the maximum volume level of this receiver.
Off :
Deactivates the built-in amplifier.
Low Power:
VOL 00 to 30 (Select this if the maximum
power of the speakers is less than 50 W)
High Power:
VOL 00 to 50
Rear Speaker
*
12
You can activate/deactivate the rear speakers.
Off, On
Mode
*
13
Mono
Only for FM. (
Off, On
),
☞
[10]
DX / Local
Only for FM. (
DX, Local
),
☞
[11]
SSM
Only for FM.
☞
[11]
*
11
This subwoofer level setting take effects only when surround is deactivated (
☞
also page 41).
*
12
Functions only when Dual Zone is activated.
*
13
Items listed under <Mode> vary among the playback sources.
Adjusts fader
Adjust balance
EN35-44_KW-AVX700A_f.indd 43
EN35-44_KW-AVX700A_f.indd 43
06.2.17 10:14:32 AM
06.2.17 10:14:32 AM