(No.MA101)1-11
3.1.5 Removing the rear bracket
(See Figs.10)
• Prior to performing the following procedures, remove the dis-
play unit, detach panel assembly, front panel assembly and top
drive unit.
From the rear side of the main body, remove the five screws
G
attaching the rear bracket.
Fig.10
3.1.6 Removing the DVD mechanism assembly
(See Figs.11 and 12)
• Prior to performing the following procedures, remove the dis-
play unit, detach panel assembly, front panel assembly and top
drive unit.
(1) From the top side of the main body, release the lock of the
connector
CN52
on the main board in an upward direction
and disconnect the flexible wire. (See Fig.11.)
(2) Remove the two screws
H
and screw
J
attaching the mech-
anism cover. (See Fig.11.)
(3) Release the lock of the connector
CN101
on the main
board in an upward direction and disconnect the card wire.
(See Fig.12.)
Reference:
When connecting the card wire to the connector
CN101
, pass
it through the lower part of the mechanism bracket. (See
Fig.12.)
Fig.11
Fig.12
G
Rear bracket
J
CN52
Main board
H
H
Mechanism cover
Flexible wire
DVD mechanism assembly
Mechanism bracket
CN101
Main board
Содержание EXAD KD-AV7000
Страница 17: ... No MA101 1 17 Fig 9 Fig 10 Fig 11 Motor bracket S E Worm gear 16 0 1 mm Motor Double worm Display drive unit ...
Страница 59: ... No MA101 1 59 ...
Страница 106: ...3 46 MEMO ...