JVC DX97US - GRDX97 MiniDV Digital Camcorder, Инструкция по эксплуатации

Страница: 19 / 52

VIDEO PLAYBACK
VID
E
O
RECO
RDI
NG
& PLA
Y
B
ACK
EN
19
MasterPage: Video_Right
To choose whether or not the following displays
appear on the connected TV
●
Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. (
墌
pg. 27, 31)
Or, press DISPLAY on the remote control to turn on/off the
date indication.
●
Time Code
Set “TIME CODE” to “ON” or “OFF”. (
墌
pg. 27, 31)
●
Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(
墌
pg. 27, 31)
NOTES:
●
It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (
墌
pg. 11)
●
To monitor the picture and sound from the camcorder
without inserting a tape or memory card, set the
camcorder’s Power Switch to “
A
” or “
M
”, then set your TV
to the appropriate input mode.
●
Make sure you adjust the TV sound volume to its minimum
level to avoid a sudden burst of sound when the camcorder
is turned on.
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (
墌
pg. 20)
Installing The Battery
The remote control uses one
lithium battery (CR2025).
1
Pull out the battery holder
by pushing the lock tab.
2
Insert the battery in the
holder, and be sure to have the
“+” mark visible.
3
Slide the holder back in until
you hear a click.
Beam Effective Area (indoor use)
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance for
indoor use is 5 m (16 ft).
NOTE:
The transmitted beam may not be
effective or may cause incorrect
operation when the remote sensor is directly exposed to
sunlight or powerful lighting.
Buttons And Functions
A
Infrared beam transmitting window
●
Transmits the beam signal.
The following buttons are available only when the
camcorder’s Power Switch is set to “PLAY”.
B
PAUSE Button
●
Pauses the tape (
墌
pg. 20)
Up Button (
墌
pg. 20)
C
SLOW Rewind Button (
墌
pg. 20)
D
REW Button
●
Rewind/Reverse Shuttle Search on a tape (
墌
pg. 18)
●
Displays previous file in a memory card (
墌
pg. 22)
Left Button (
墌
pg. 20)
E
INSERT Button (
墌
pg. 40)
F
SHIFT Button (
墌
pg. 20, 41)
G
DISPLAY Button (
墌
pg. 19, 37, 42)
H
SLOW Forward Button (
墌
pg. 20)
I
PLAY Button
●
Starts Playback of a tape (
墌
pg. 17)
●
Starts Auto Playback of images in a memory card
(
墌
pg. 22)
J
FF Button
●
Forward/Forward Shuttle Search on a tape (
墌
pg. 18)
●
Displays next file in a memory card (
墌
pg. 22)
Right Button (
墌
pg. 20)
K
A. DUB Button (
墌
pg. 40)
L
STOP Button
●
Stops the tape (
墌
pg. 17)
●
Stops Auto Playback (
墌
pg. 22)
Down Button (
墌
pg. 20)
M
EFFECT Button (
墌
pg. 20)
N
EFFECT ON/OFF Button (
墌
pg. 20)
The following buttons are available when the camcorder’s
Power Switch is set to “
A
” or “
M
”.
a
Zoom (T/W) Buttons
Zoom in/out (
墌
pg. 16, 20)
(Also available with the Power Switch set to “PLAY”)
b
START/STOP Button
Functions the same as the Recording Start/Stop
Button on the camcorder.
c
S.SHOT Button
Functions the same as
SNAPSHOT on the camcorder.
(Also available with the Power Switch set to “PLAY”)
Playback Using The Remote Control
1
1
2
3
Lock tab
Remote sensor
GR-DX97US.book Page 19 Monday, February 9, 2004 2:28 PM